This is a property of type Text.
D
quad welder interface +
PM service and service call reports will be sent to the engineer's own email address automatically, but '''''only if''''' the device "Email" property is set up correctly.
This needs to be done separately using a device magic account.
<div class="icon-instructions info-icon">
<div class="icon-instructions-icon"><i class="fa fa-info-circle"></i></div>
<div class="icon-instructions-text">...This has to be redone if an engineer's device is renewed or needs to be re-added in Device Magic</div>
</div><br/> +
Device magic has been know to get stuck delivering finished forms. Symptoms will be -
-Once a form is completed it gets moved to the 'submissions' section. Once there it can take hours or days for it to finally upload.
-Unless you manually go into submissions it all seems like it has uploaded ok as it gets moved from 'drafts', but it hasn't.
-This happens whether on 4g+ or fibre optic WiFi at home
-I eventually give up or forget to keep refreshing it on the submissions page, then if I go back on the app a few days later that is sometimes when it finally sends +
There are many tools available to help trace EtherCAT faults. This document describes some more advanced features that can help pinpoint an intermittent or hard to find issue. You will need a good working knowledge of the machine and the basis of EtherCAT networking
See Also [[TwinCat Connection Faults]] +
If there is a failure of a tool out or tool home sensor on the Stuga spindle ring, it is important to be able to quickly disable the input so the machine can continue production until the problem can be properly resolved. The software has an inbuilt functionality to do this - this tutorial takes you through the necessary steps +
This tutorial guides you in how to create Work Instructions in Dokit and to avoid the pitfalls.
If the Work Instruction is already created, follow the process [[Dokit - Editing Work Instructions]]
= Warnings =
<div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...Do not publish personal or secure information</div>
</div><div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...Do not publish passwords</div>
</div><div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...Do not publish anything inflammatory, offensive or illegal</div>
</div><br/> +
This tutorial shows you how to edit the content of a work instruction, allowing you to
*Add New Steps
*Add numbering and bullets to the text
*Add and crop Photos
*Annotate photos with arrows, numbers and text
*Change step sequence and insert steps
*Add Call-outs and warnings
*Add Links to other websites or other Dokit pages
=Warnings=
<div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...Do not publish personal or secure information</div>
</div><div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...Do not publish passwords</div>
</div><div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...Do not publish anything inflammatory, offensive or illegal</div>
</div><br/> +
The name of a document cannot actually be changed once it is saved.
However a similar result is gained by using the "Move" command, which creates a copy of the page and adds a forwarding link from the old to the new +
E
if you have issues with certain screen resolutions cropping off buttons and need to design a form which works at all resolutions, and also allows the user to resize parts of the form, then this tutorial will help. +
When an Ecoline is commissioned, the positional accuracy needs to be set up.
These are also useful tests to check if the machine is maintaining positional accuracy
<div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...ALWAYS make sure you have consistent, repeatable results before making any parameter changes</div>
</div><br/> +
If a drive fails on an Ecoline, the V axis can be utilised to enable the Ecoline to still run as a machining centre, albeit with V notching now disabled. This is a better situation than no machining at all, as all factories have V notching capability in addition to an Ecoline +
This is the full setup procedure for V notches on an Ecoline. This should only be needed on initial commissioning or if the shape of the notch has changed due to some physical intervention, for example -
- Blade Change
- Blade buckled
<br/><div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...If there is no direct reason to change the blade shape or position, there is a different root cause to the problem that changing parameters WILL NOT SOLVE</div>
</div><div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...If the results of your tests do not make sense, or the position seems to vary by the wrong amount or wrong direction after making a change, then a serious mechanical problem exists elsewhere. There is no sense carrying on because you cannot complete this setup unless the machine is consistent and reliable</div>
</div>
<br/> +
Installation of an Ecoline is quite straight-forward as all of the main levelling and alignment is taken care of inside the main module housing.
Installation involves 3 steps
# Levelling main module
# Attaching and Levelling Infeed Frame
# Refitting Infeed cover +
Never found out why but seems Windows tries to manage the Mapped Drives before The Network Service is up and running +
F
We are using Monday.com to handle daily timesheet entries. The layout of the form has been designed to make data input as minimal as possible. We are looking to improve accuracy of time capture, cut down administration time and to make historical data available without the need to store paperwork or take pictures. You will only be able to view and edit your timesheet when logged into your Monday.com account. Other employees are unable to see your data. +
This area is prone to collect sharp - cornered offcuts which can pull the seal from the SR axis bearing. The kit will help prevent damage.
Use Kit R0019199 Upgrade: Autoflow Slewing Ring Guard Kit
<br/> +
This upgrade replaces the crank arm assemblies on Z065, Z066 and Z067 with a direct drive system to improve reliability
This procedure involves mechanical fitting, electrical wiring and help from a TwinCAT3 competent engineer at HQ for software changes
<div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...The drives must be programmed before parts sent out</div>
</div><div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...Motors must be rewired for Delta and NOT Star</div>
</div>
<br/> +
This procedure describes how to upgrade a flowline to increase the standard capacity from 6.0m to 6.5m.
The procedure involves extending the machining centre outfeed travel and saw infeed travel base to 6.0m to cope with a longer rail on each side. These are generally supplied as a new part.
Other ancillary parts that will need extending
* Cables
* Energy Chains +
If a PC fails on a machine in the field and the hard drive data cannot be recovered, it is necessary to replace the PC. This may create a version conflict, as the new PC will have later versions of twinCAT installed than the original
This tutorial outlines the steps required to bring all the machine systems up to the latest level to ensure compatibility
<br/><div class="icon-instructions caution-icon">
<div class="icon-instructions-icon"><i class="fa fa-exclamation-triangle"></i></div>
<div class="icon-instructions-text">...This is a one-way process that cannot be reversed</div>
</div><br/> +
G
The GE control components are now obsolete and we have had to find a new manufacture to use. We have decided to go with Eaton control equipment for this. We are using the same supplier for these products and we have the added benefit if the supplier holding these parts in there stores. We had a choice to use either ABB, Eaton or Schneider components.
Although all of the individual Eaton components are a direct replacement for the GE components, there are certain situation that we may be tripped up. This includes times when we need to change a motor breaker that has an auxiliary block connected to it. We can change the breaker but the GE auxiliary block will not fit on the new Eaton one. This means that the Eaton components need to have different part numbers to the GE components.
This document will layout the new part numbers and what they relate to and instructions on how they are added and changed in the Sage system. +
Français
English
Deutsch
Español
Italiano
Português