Manual:Autoflow Mk2 Maintenance Manual

Autoflow Mk2 Maintenance Manual

Daily, Weekly and Monthly Maintenance Procedures for Autoflow Mk2 / 3 A2005-A2025

Recommendations

en

Contacting Stuga Service

How to report an issue on Stuga Machinery

en

Important Information - Stuga Machinery

This maintenance log is designed to be used in conjunction with the Stuga Daily, Weekly and Monthly maintenance procedures. These maintenance procedures are essential to the function of the machine and must be carried out.

en

Recommended Lubricants

Lubrication is essential for reliability and extended life of your Stuga machine

en

Machine References and Naming - Autoflow

Describes the names used for the Inputs, Outputs and Servo drives

Regular Maintenance Procedures

en

Autoflow Mk1-Mk3 Daily Maintenance

Autoflow Mk1 - 3 Daily Maintenance Procedures to be carried out by Operators

en

Autoflow Maintenance - Infeed

Weekly and Monthly Maintenance Procedures for Autoflow Infeed Table

en

Autoflow Maintenance - Gripper

Weekly and Monthly Maintenance Procedures for Autoflow Gripper

en

Autoflow Maintenance - Machining Centre

Procedures for Maintenance of the Autoflow Machining Centre Module

en

Autoflow Maintenance - Sawing Centre

Procedures for Daily, Weekly and Monthly Maintenance on Autoflow Sawing Centre Module

en

Autoflow Maintenance - Outfeed Table

Procedures for Daily, Weekly and monthly maintenance on Autoflow Outfeed Table

Setup Procedures

en

Autoflow Mk3 Infeed Measurements

Description of the important Autoflow Mk3 Measurements

en

Setting Ultrasonic Sensor - Vertical

How to set ultrasonic sensor to detect profile

en

Setting Profile Detection Laser Sensor

Setting the laser sensor used on Flowline / ZX offcut sensors and Autoflow measurement sensors

yes Stuga_Logo_Square.jpg en none 0