WinMulti Master Directory Files

Mul File Main Page

Mul

Overview

The master directory contains all the information required to run the winMulti software. This folder is referenced in the Masterdir File and could be located anywhere, but is generally found in the following locations

Common Locations

	Configuration	Location	Notes
Latest	Machines with centralised control (All TwinCAT3 Machines - ZX5s , Beckhoff upgraded machines, software upgrades to v6)	c:\ddrive\
	Machines with front end winMulti on a beckhoff PC	d:\ (Memory Stick or network drive)	A USB stick was originally used to minimise the use of hard drive space, and to provide a simple method of PC replacement. However a memory stick will corrupt after a couple of years of use, and the general change to use a shared directory on another PC was adopted.
	Machines with a seperate machine and saw hardware configuration (original flowlines and ZX3/4)	c:\multi\
Oldest	DOS Machines	c:\

Files - .Mul and .Saw Files

.mul and .saw files are text files, normally csv that hold the setup data for the winMulti software

...These files are standard ASCII text files becasue they were originally conceived pre-1995 for DOS based systems and have maintained compatiblity

No	File Name	Description	Type	Location
1	Adjust	Software generated log of operator adjustments to parameters	Log	https://stuga.dokit.app/wiki/Mul_File_Specification_-_Adjust
2	Alarms	Configuration file for Input and output triggered alarms	Machine	https://stuga.dokit.app/wiki/Mul_File_Specification_-_Alarms
4	Axes	Configuration file forMotion Controlled axes on machine	Machine	https://stuga.dokit.app/wiki/Mul_File_Specification_-_Axes
5	AxesLR			https://stuga.dokit.app/wiki/Mul_File_Specification_-_AxesLR
6	Backup	Configuration file for backed up locations	Machine	https://stuga.dokit.app/wiki/Mul_File_Specification_Backup
7	Clamppos	Configuration file for clamp positioners	Machine	https://stuga.dokit.app/wiki/Mul_File_Specification_-_Clamppos
8	Clamps	Configuration file for clamps directly controlled by location of profile and gripper	Machine	https://stuga.dokit.app/wiki/Mul_File_Specification_-_Clamps
9	Colours	Configuration file for profile colour descriptions	Customer	https://stuga.dokit.app/wiki/Mul_File_Specification_-_Colours
10	Draw	Configuration file for "Flowline Ops" editor	Machine	https://stuga.dokit.app/wiki/Mul_File_Specification_-_Draw
12	Ejpos	Configuration file for ejector		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Ejpos
13	etherCatDevices	Configuration file for etherCAT diagnostics System		https://stuga.dokit.app/wiki/Mul_File_Specification_-_EtherCatDevices
14	Hardware	Configuration file for Window Hardware setup in "flowops" software		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Hardware
15	Inverters	Configuration file for complex multiple Inverter setup		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Inverters
16	IODef	Configuration file for Input and Output channel specification		https://stuga.dokit.app/wiki/Mul_File_Specification_-_ioDef
18	IP	Log file for network setup notes, IP addresses, etc		https://stuga.dokit.app/wiki/Mul_File_Specification_-_IP
19	Opttol	Configuration file for optimiser tolerances		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Opttol
20	Optypes	Configuration file for operation types in "flowops" software		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Optypes
21	Osensor.mul	Configuration file for offcut position sensors		https://stuga.dokit.app/wiki/Mul_File_Specification_Osensor
22	Peps	Configuration file for Profile Extra Parameters (in addition to profile/mul)		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Peps
23	Preps	Configuration file for Hardware Preps in "flowops" software		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Preps
24	Profile	Configuration file for main profile parameters		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Profile
25	Queueno	Log file of next number to use in the transfer table queue system		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Queueno
26	Reminders	Configuration file for reminder table - sets user reminders to appear	Customer	https://stuga.dokit.app/wiki/Mul_File_Specification_-_Reminders
27	Settings	Configuration file for Settings in "flowops" software		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Settings
28	Shifts	Configuration file for Customer shift pattern	Customer	https://stuga.dokit.app/wiki/Mul_File_Specification_-_Shifts
30	StdOps	Configuration file for tooling operations		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Stdops
31	Systems	Database file of profile systems		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Systems
32	Tools	Configuration file for toolong setup on ring		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Tools
33	Trim	Configuration file for profile trimming		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Trim
34	userVariables	Parameters file for user-defined parameters used in macro mnd-files		https://stuga.dokit.app/wiki/Mul_File_Specification_-_userVariables
35	Xposhold	Configuration file for "holding" outputs off if an axis is in a certain position range		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Xposhold
36	Zstdopdef	Database of mnd file types and variables used		https://stuga.dokit.app/wiki/Mul_File_Specification_-_Zstdopdef

Files - .ZFT

Zebra Format Files (.zft) are the configuration files for the label generation when

• The labels are created by the winMulti software (ie not generated in a ZEB file by the office software - See Stuga Zebra Label Batch File Specification)
• Remake Labels
• Offcut and Waste Labels

See ZFT File Format and Second Barcode Label For Saws for more information

Files - .DAT

Thes files are produced by the optimiser system to help diagnose the optimisation process. A set of .dat files is created for each optimisation group (all pieces of the same profile and colour combination). The optimiser is a seperate file which crunches this data and outputs its own .dat file with the results of the optimisation

File	Function	Created By
gaps.dat	Gap amount between all prep combinations	winMulti
pieces.dat	List of offcuts of the current profile / colour being optimised	winMulti
offcuts.dat	List of useable offcuts of the current profile / colour being optimised	winMulti
results.dat
oplog.dat

Directory - Saw

en none 0

Draft