This is a property of type Text.
Z
Alignment and mounting procedure for main x axis drive rail +
Checklist to overcome gripping accuracy issues on ZX5 +
How to change the depth and position of the V notch on a ZX5 machine +
How to check and correct the alignment of a ZX5 machine +
With the correct model and spec the ZX5 is able to take some tall profiles above 90-95 mm tall.
To be able to take any profile bar above 90mm in height, certain manual mechanical changes and adjustments are required to the saw outfeed clamp and the grippers, by the operator / maintenance engineer, before being able to put a tall profile through the machine. The below guide shows how to carry out these adjustments. +
This will guide you through the machanical setup of the grip pins, along with datum and loadPos calibration. +
X axis drive assembly
Gripper assembly +
How to solve ZX5 Gripper Breaking Issue +
Things to look out for and check when setting up ZX5 energy chains on the ZX5 MH Outfeed or Saw Infeed +
This document is intended for existing users and owners of Stuga Flowlines to help explain the improvements and enhancements made to the flowline / ZX3 / ZX4 range of machines into out latest flagship product - the ZX5 +
Additions to ZX5 machine to enhance operator safety from Z084 +
Correct procedure for ZX5 Installation +
Key Steps for mechanical installation of ZX5 +
Key Steps for mechanical installation of ZX5 +
Guarding conformity checks +
Connection details for interconnecting pneumatic circuits between ZX5 modules +
Guide for basic Input and Output testing / setup on the ZX5 MH Infeed Module +
Maintenance Training Schedule for ZX5 +
Notes on the gap distances between modules on a ZX5 installation +
Operator Training Schedule for ZX5 +
Français
English
Deutsch
Español
Italiano
Português