This is a property of type Text.
T
Solving Intermittent Nextmove Issues +
Setting up external router for customer network isolation +
Error message appears on screen to operator. “Idle Time Overrun – Contact Stuga”. It is not clear what this message means or what could be the root causes. +
Obsolete components on Stuga Ecolines +
The Sawing Module can be upgraded to use a 500mm blade. On machines with the older safety system, the larger 500mm blade cuts through the safety switch when doing 90 degree cuts. +
On winMulti startup sequence, the program crashes before the machine is allowed to datum and initialise. +
Tuning of EP7041 box is tricky, but following a step through telephone call with Etienne at Beckhoff, it was successful with the following steps +
The homing setup parameters for a Beckhoff system are unclear +
This will show how to setup a mint controller i.e. NextMove ESB-2 with an RS Automation Drive and servo motor but to act as a stepper motor and being controlled from the ESB-2 as a stepper. +
Any number of multiple batches can now be loaded one after the other, including remake batches and pos tests. +
Upgrading to winMulti v6 +
Issue connecting to the Windows XP machine on F060. +
Due to the SR Axis losing its datum position an additional datum sensor is to be fitted. +
Saw blade has cut into gripper, despite the protection system with the sensors being fitted to prevent the saw valve output operating. +
Currently, the Flowlines have an m12 barrel sensor fitted for the OCLEAR sensor. After research and updates to new machines, we have found that fitting an ultrasonic sensor is much more reliable and effective at picking up different profile colours. For this reason, we have created an upgrade kit to enhance the functionality of the OCLEAR sensor. +
Operator Checks for Transom Symmetry +
The previous design of screen cover was susceptible to cracking and failing. +
If the plunge cylinder fails on the spindle, the entire assembly can come off the end of the bearing rail and fall into the centre of the spindle ring, causing more damage +
On the Hepco rack / pinion / journal system, it is possible to get into a situation where no more adjustment is available using the motor mounts. +
There are regular reports of the concertina doors coming out of their slideways on the Autoflow. The moving end of the door is meant to be contained using a kit which has a plate bolted to the underside of the door, and which has a downwards facing plastic top hat bush. This bush is located using a dowel which is press fitted into the plate. Over time, the dowel works loose and falls out, resulting in the top hat bush falling away. Part number M0001024 +
Français
English
Deutsch
Español
Italiano
Português