WinMulti Master Directory Files : Différence entre versions

[version en cours de rédaction][version en cours de rédaction]
Ligne 242 : Ligne 242 :
 
Zebra Format Files (.zft) are the configuration files for the label generation when
 
Zebra Format Files (.zft) are the configuration files for the label generation when
  
−
* The labels are created by the winMulti software (ie not generated in a ZEB file by the office software - See [[Stuga Zebra Label Batch File Specification]])
+
*The labels are created by the winMulti software (ie not generated in a ZEB file by the office software - See [[Stuga Zebra Label Batch File Specification]])
−
* Remake Labels
+
*Remake Labels
−
* Offcut and Waste Labels
+
*Offcut and Waste Labels
  
 
See [[ZFT File Format]] and [[Second Barcode Label For Saws]] for more information
 
See [[ZFT File Format]] and [[Second Barcode Label For Saws]] for more information
  
−
= Files  - .DAT =
+
=Files  - .DAT=
 
Thes files are produced by the optimiser system to help diagnose the optimisation process. A set of .dat files is created for each optimisation group (all pieces of the same profile and colour combination). The optimiser is a seperate file which crunches this data and outputs its own .dat file with the results of the optimisation
 
Thes files are produced by the optimiser system to help diagnose the optimisation process. A set of .dat files is created for each optimisation group (all pieces of the same profile and colour combination). The optimiser is a seperate file which crunches this data and outputs its own .dat file with the results of the optimisation
 
{| class="wikitable"
 
{| class="wikitable"
Ligne 269 : Ligne 269 :
 
|-
 
|-
 
|results.dat
 
|results.dat
−
|
+
|Results of the optimisation
−
|
+
|optimiser.exe / optim32.exe
 
|-
 
|-
 
|oplog.dat
 
|oplog.dat
−
|
+
|Output log of the optimisation process
−
|
+
|optimiser.exe / optim32.exe
 
|}
 
|}
  
−
= Files - .db3 =
+
=File - [BuildNo].db3=
−
 
+
This is a SQLite database file to hold the offcuts created by the machine
 +
{{Info|...Using the db3 database for offcuts was implemented in version 5.2. Prior to this, the offcuts were stored in offcuts.saw, however this was slow and buggy when the offcuts data grew too large.}}<br />
 
=Directory - _machine=
 
=Directory - _machine=
  

Version du 30 juin 2022 à 09:22

Mul File Main Page

Auteur avatarGareth Green | Dernière modification 1/07/2022 par Gareth Green en cours de rédaction

Pas encore d'image


Mul File Main Page

Overview

The master directory contains all the information required to run the winMulti software. This folder is referenced in the Masterdir File and could be located anywhere, but is generally found in the following locations

Common Locations
Configuration Location Notes
Latest Machines with centralised control

(All TwinCAT3 Machines - ZX5s , Beckhoff upgraded machines, software upgrades to v6)

c:\ddrive\
Machines with front end winMulti on a beckhoff PC
 d:\

(Memory Stick or network drive)

A USB stick was originally used to minimise the use of hard drive space, and to provide a simple method of PC replacement. However a memory stick will corrupt after a couple of years of use, and the general change to use a shared directory on another PC was adopted.
Machines with a seperate machine and saw hardware configuration

(original flowlines and ZX3/4)

c:\multi\
Oldest DOS Machines c:\


Files - .Mul and .Saw Files

.mul and .saw files are text files, normally csv that hold the setup data for the winMulti software

...These files are standard ASCII text files becasue they were originally conceived pre-1995 for DOS based systems and have maintained compatiblity


No File Name Description Type Location
1 Adjust Software generated log of operator adjustments to parameters Log https://stuga.dokit.app/wiki/Mul_File_Specification_-_Adjust
2 Alarms Configuration file for Input and output triggered alarms Machine https://stuga.dokit.app/wiki/Mul_File_Specification_-_Alarms
4 Axes Configuration file forMotion Controlled axes on machine Machine https://stuga.dokit.app/wiki/Mul_File_Specification_-_Axes
5 AxesLR https://stuga.dokit.app/wiki/Mul_File_Specification_-_AxesLR
6 Backup Configuration file for backed up locations Machine https://stuga.dokit.app/wiki/Mul_File_Specification_Backup
7 Clamppos Configuration file for clamp positioners Machine https://stuga.dokit.app/wiki/Mul_File_Specification_-_Clamppos
8 Clamps Configuration file for clamps directly controlled by location of profile and gripper Machine https://stuga.dokit.app/wiki/Mul_File_Specification_-_Clamps
9 Colours Configuration file for profile colour descriptions Customer https://stuga.dokit.app/wiki/Mul_File_Specification_-_Colours
10 Draw Configuration file for "Flowline Ops" editor Machine https://stuga.dokit.app/wiki/Mul_File_Specification_-_Draw
12 Ejpos Configuration file for ejector https://stuga.dokit.app/wiki/Mul_File_Specification_-_Ejpos
13 etherCatDevices Configuration file for etherCAT diagnostics System https://stuga.dokit.app/wiki/Mul_File_Specification_-_EtherCatDevices
14 Hardware Configuration file for Window Hardware setup in "flowops" software https://stuga.dokit.app/wiki/Mul_File_Specification_-_Hardware
15 Inverters Configuration file for complex multiple Inverter setup https://stuga.dokit.app/wiki/Mul_File_Specification_-_Inverters
16 IODef Configuration file for Input and Output channel specification https://stuga.dokit.app/wiki/Mul_File_Specification_-_ioDef
18 IP Log file for network setup notes, IP addresses, etc https://stuga.dokit.app/wiki/Mul_File_Specification_-_IP
19 Opttol Configuration file for optimiser tolerances https://stuga.dokit.app/wiki/Mul_File_Specification_-_Opttol
20 Optypes Configuration file for operation types in "flowops" software https://stuga.dokit.app/wiki/Mul_File_Specification_-_Optypes
21 Osensor.mul Configuration file for offcut position sensors https://stuga.dokit.app/wiki/Mul_File_Specification_Osensor
22 Peps Configuration file for Profile Extra Parameters (in addition to profile/mul) https://stuga.dokit.app/wiki/Mul_File_Specification_-_Peps
23 Preps Configuration file for Hardware Preps in "flowops" software https://stuga.dokit.app/wiki/Mul_File_Specification_-_Preps
24 Profile Configuration file for main profile parameters https://stuga.dokit.app/wiki/Mul_File_Specification_-_Profile
25 Queueno Log file of next number to use in the transfer table queue system https://stuga.dokit.app/wiki/Mul_File_Specification_-_Queueno
26 Reminders Configuration file for reminder table - sets user reminders to appear Customer https://stuga.dokit.app/wiki/Mul_File_Specification_-_Reminders
27 Settings Configuration file for Settings in "flowops" software https://stuga.dokit.app/wiki/Mul_File_Specification_-_Settings
28 Shifts Configuration file for Customer shift pattern Customer https://stuga.dokit.app/wiki/Mul_File_Specification_-_Shifts
30 StdOps Configuration file for tooling operations https://stuga.dokit.app/wiki/Mul_File_Specification_-_Stdops
31 Systems Database file of profile systems https://stuga.dokit.app/wiki/Mul_File_Specification_-_Systems
32 Tools Configuration file for toolong setup on ring https://stuga.dokit.app/wiki/Mul_File_Specification_-_Tools
33 Trim Configuration file for profile trimming https://stuga.dokit.app/wiki/Mul_File_Specification_-_Trim
34 userVariables Parameters file for user-defined parameters used in macro mnd-files https://stuga.dokit.app/wiki/Mul_File_Specification_-_userVariables
35 Xposhold Configuration file for "holding" outputs off if an axis is in a certain position range https://stuga.dokit.app/wiki/Mul_File_Specification_-_Xposhold
36 Zstdopdef Database of mnd file types and variables used https://stuga.dokit.app/wiki/Mul_File_Specification_-_Zstdopdef

Files - .ZFT

Zebra Format Files (.zft) are the configuration files for the label generation when

See ZFT File Format and Second Barcode Label For Saws for more information

Files - .DAT

Thes files are produced by the optimiser system to help diagnose the optimisation process. A set of .dat files is created for each optimisation group (all pieces of the same profile and colour combination). The optimiser is a seperate file which crunches this data and outputs its own .dat file with the results of the optimisation

File Function Created By
gaps.dat Gap amount between all prep combinations winMulti
pieces.dat List of offcuts of the current profile / colour being optimised winMulti
offcuts.dat List of useable offcuts of the current profile / colour being optimised winMulti
results.dat Results of the optimisation optimiser.exe / optim32.exe
oplog.dat Output log of the optimisation process optimiser.exe / optim32.exe

File - [BuildNo].db3

This is a SQLite database file to hold the offcuts created by the machine

...Using the db3 database for offcuts was implemented in version 5.2. Prior to this, the offcuts were stored in offcuts.saw, however this was slow and buggy when the offcuts data grew too large.


Directory - _machine

Directory - Archive

Directory - Backup

Directory - Batches

Directory - DXF

Directory - Flowline Ops

Directory - OPBIN

Directory - Opdesign

Directory - samout

Directory - Saw


Commentaires

Draft

Récupérée de « https://stuga.dokit.app/w/index.php?title=WinMulti_Master_Directory_Files&oldid=5164 »
© 2017 - 2024 Dokit, SAS.