Manual:ZX5 Operation Manual

ZX5 Operation Manual

Operation Manual for Stuga ZX5

Introduction

ZX5 Operator Training Guide

Operator Training Schedule for ZX5

ZX5 Safety Standards And Compliance

ZX5 Safety Standards And Compliance

Autoflow Power On

How to power on the Autoflow

WinMulti Shutdown procedure

How to correctly shut down the Stuga Autocut

WinMulti - Main Screen

Main screen icons on winMulti

WinMulti - Load a Batch

This page will inform the operator how to load a Batch in winMulti

WinMulti - Adding Cuts to the Manual Input Piece

This page will instruct the operator in the correct Procedure to add cuts to the manual input profile.

WinMulti - Changing The Colour Identification Box

How to use the colour identification box to indicate profile colour and loading orientation

WinMulti - Advanced Optimisation

This page will explain the options for advanced optimisation

WinMulti - Advanced Bar Data

This page is a more in depth explanation of the Bar Data Tab

WinMulti - Postest

This page will describe how to generate a Postest (operation position test), and is used to set the distance relationship between the routed holes and the saw blade so that routed pieces line up correctly back to back.

WinMulti - Datum Test

This page will describe how to perform a Datum Test

yes Manual-ZX5_Maintenance_Manual_Stuga_Square.jpg en none 0