Manual:WinMulti Software Operating Guide

Cette page contient des modifications qui ne sont pas marquées pour la traduction.

WinMulti Software Operating Guide

Operation manual for the winMulti control software on Stuga Machinery

Basic Operations

Basics

WinMulti - Run and Exit

Running and terminating the winMulti Program

WinMulti - Main Screen

Main screen icons on winMulti

WinMulti - Load a Batch

This page will inform the operator how to load a Batch in winMulti

Bar Queue

WinMulti - Changing The Colour Identification Box

How to use the colour identification box to indicate profile colour and loading orientation

Manual Input

WinMulti - Performing a Manual Input

This page will instruct the operator how to add a manual input piece to the bar queue.

WinMulti - Adding Cuts to the Manual Input Piece

This page will instruct the operator in the correct Procedure to add cuts to the manual input profile.

WinMulti - Manual Input Cuts on an Autoflow or Microline

This page will explain how to add manual cuts on an Autoflow or Microline

Basic Tests

WinMulti - Datum Test

This page will describe how to perform a Datum Test

WinMulti - Postest

This page will describe how to generate a Postest (operation position test), and is used to set the distance relationship between the routed holes and the saw blade so that routed pieces line up correctly back to back.

Remakes

WinMulti - Remakes

This will inform the operator how to remake pieces in winMulti. Setting up A password for Remakes on Winmulti Version MK6 software - Added 2022

Offcuts

WinMulti - Offcuts

This page will inform the operator how to add/Remove an Offcut

Alarms

Service Diagnostics

WinMulti - Problem Bars and Bar Data

This page gives troubleshooting advice and looks at the Pieces on the Bar Data screen within the Service Menu

WinMulti - Advanced Bar Data

This page is a more in depth explanation of the Bar Data Tab

IO Testing

WinMulti - IO Screens - Autoflow

This page shows each of the IO Screens on an Autoflow and describes each Input/Output

Stuga Machine IO Dictionary - Inputs

List of input references used on Stuga Machines

Drive Testing

WinMulti - Drives

This Page describes the drives screen in the winMulti Service Menu

Settings

Profile Settings

Reducing Saw Cut Height for Lower Profiles

For sawing modules running from winMulti (including flowlines with integrated control), there is an option to reduce the cut height. This is managed through an additional sensor on the saw cut stroke cylinder. This is particularly useful on saws with a 500mm blade (to cut wide or tall profiles) but a reduced cycle time can be gained by reducing the saw cut stoke time by limiting its travel on shorter profiles

Advanced Procedures

Recovery of Bar Queue following winMulti Crash

Recovering the bar queue to match the number of bars on transfer table following a crash on winMulti

WinMulti - Advanced Optimisation

This page will explain the options for advanced optimisation

References

yes en none 0

Récupérée de « https://stuga.dokit.app/w/index.php?title=Manual:WinMulti_Software_Operating_Guide&oldid=1423 »