Manual:Autoflow Operator Manual

Autoflow Operator Manual

Autoflow Operator Manual

Health and Safety

WinMulti Shutdown procedure

How to correctly shut down the Stuga Autocut

Operating Software (WinMulti)

WinMulti - Main Screen

Main screen icons on winMulti

WinMulti - Run and Exit

Running and terminating the winMulti Program

WinMulti - Load a Batch

This page will inform the operator how to load a Batch in winMulti

WinMulti - Offcuts

This page will inform the operator how to add/Remove an Offcut

WinMulti - Remakes

This will inform the operator how to remake pieces in winMulti. Setting up A password for Remakes on Winmulti Version MK6 software - Added 2022

WinMulti - Adding Cuts to the Manual Input Piece

This page will instruct the operator in the correct Procedure to add cuts to the manual input profile.

TB0436 Creating a Backup Through WinMulti

A backup zip folder of all necessary files can be created in WinMulti. By pressing the backup button (F11) and navigating to the backup’s folder (C:\multi\backup) a machine backup will be created.

WinMulti - Postest

This page will describe how to generate a Postest (operation position test), and is used to set the distance relationship between the routed holes and the saw blade so that routed pieces line up correctly back to back.

WinMulti - Datum Test

This page will describe how to perform a Datum Test

WinMulti - Changing The Colour Identification Box

How to use the colour identification box to indicate profile colour and loading orientation

WinMulti - Advanced Optimisation

This page will explain the options for advanced optimisation

WinMulti - Drives

This Page describes the drives screen in the winMulti Service Menu

WinMulti - Advanced Bar Data

This page is a more in depth explanation of the Bar Data Tab

WinMulti - IO Screens - Autoflow

This page shows each of the IO Screens on an Autoflow and describes each Input/Output

yes Stuga_Logo_Square.jpg en none 0