List of input references used on Stuga Machines
Sommaire
For output references see here
- All Stuga machines share similar inputs to do similar functions (eg the start button is the same on any machine). To keep this modular approach, each function is given a specific reference number from 1 to 500. This reference or IORef is the same on any machine.
- This number is used as the wire labelling number on newer machines (all Autoflows and ZX5s)
- To maintain backwards compatibility with older machines (Saws, Flowlines, Ecolines, etc, there is also a cross-reference to the original cable numbering.
- More information on a particular input can be found by clicking on the code, if external ink is set (blue text)
| IO Ref | Legacy Wire
Label |
Code | Description | |
|---|---|---|---|---|
| 1 | InA_GripOff | Gripper in released position | ||
| 2 | InA_Measure1 | Moving Offcut measure Sensor 1 - On Autoflow Arm | ||
| 3 | InA_Measure2 | Moving Offcut measure Sensor 2 - On Autoflow Arm | ||
| 4 | InA_GZHome | Gripper Z axis home sensor | ||
| 5 | InA_GZLimitF | Gripper Z axis positive limit [Not Used] | ||
| 6 | InA_GZLimitR | Gripper Z axis negative limit [Not Used] | ||
| 7 | X08 | InA_GYHome | Gripper Y axis home sensor | |
| 8 | InA_GYLimitF | Gripper Y axis positive limit [Not Used] | ||
| 9 | InA_GYLimitR | Gripper Y axis negative limit [Not Used] | ||
| 10 | X00 | InA_GXHome | Gripper X axis home sensor | |
| 11 | X01 | InA_GXLimitF | Gripper X axis positive limit [Not Used] | |
| 12 | InA_GXLimitR | Gripper X axis negative limit [Not Used] | ||
| 13 | InA_IPos0On | Popup Infeed table - paddle 0 active (closest to backfence) | ||
| 14 | InA_IPos1On | Popup Infeed table - paddle 1 active | ||
| 15 | InA_IPos2On | Popup Infeed table - paddle 2 active | ||
| 16 | InA_IPos3On | Popup Infeed table - paddle 3 active | ||
| 17 | InA_IPos4On | Popup Infeed table - paddle 4 active | ||
| 18 | InA_IPos5On | Popup Infeed table - paddle 5 active | ||
| 19 | InA_IPos6On | Popup Infeed table - paddle 6 active | ||
| 20 | InA_IPos7On | Popup Infeed table - paddle 7 active (Closest to operator) | ||
| 21 | InA_CrankFwd | Popup infeed table crank motor in forward position | ||
| 22 | InA_IPos0Off | Popup Infeed table - paddle 0 inactive (closest to backfence) [Not Used] | ||
| 23 | InA_IPos1Off | Popup Infeed table - paddle 1 inactive [Not Used] | ||
| 24 | InA_IPos2Off | Popup Infeed table - paddle 2 inactive [Not Used] | ||
| 25 | InA_IPos3Off | Popup Infeed table - paddle 3 inactive [Not Used] | ||
| 26 | InA_IPos4Off | Popup Infeed table - paddle 4 inactive [Not Used] | ||
| 27 | InA_IPos5Off | Popup Infeed table - paddle 5 inactive [Not Used] | ||
| 28 | InA_IPos6Off | Popup Infeed table - paddle 6 inactive [Not Used] | ||
| 29 | InA_IPos7Off | Popup Infeed table - paddle 7 inactive (Closest to operator) [Not Used] | ||
| 30 | InA_CrankHm | Popup infeed table crank motor in home position | ||
| 31 | X35 | InA_MatlLoaded1 | ||
| 32 | InA_MatlLoaded2 | |||
| 33 | InA_Index | Sturtz Infeed Conveyor Stop | ||
| 34 | InA_ClampITHm | |||
| 35 | InA_VCUOk | |||
| 36 | InA_Bus415Ok | |||
| 37 | InA_Bus415SOk | |||
| 38 | InA_InvInfeedOk | |||
| 39 | InA_ServGXOk | |||
| 40 | InA_ServGYOk | |||
| 41 | InA_24vBusOk | |||
| 42 | InA_24vModOk | |||
| 43 | X22 | InA_AirOk | ||
| 44 | X33 | InA_Grip | ||
| 44 | In_GRIPS | |||
| 45 | InA_Estop | |||
| 45 | X16 | In_ESTOP | ||
| 46 | InA_StartButton | |||
| 46 | X23 | In_START | MH Start Button | |
| 47 | InA_StopButton | |||
| 47 | In_STOP | MH Stop Button | ||
| 48 | InA_ResetButton | |||
| 48 | X24 | In_ESRST | MH ES Reset Button | |
| 49 | X17 | InA_Estop1Pressed | ||
| 50 | X02 | InB_YHome | ||
| 51 | X03 | InB_YLimitF | ||
| 52 | InB_YLimitR | |||
| 53 | X04 | InB_ZHome | ||
| 54 | InB_ZLimitF | |||
| 55 | InB_ZLimitR | |||
| 56 | X06 | InB_RHome | ||
| 57 | InB_RLimitF | |||
| 58 | InB_RLimitR | |||
| 59 | InB_ClampOTHm | |||
| 60 | InB_ClampOTPos | |||
| 61 | InB_ClampOSHm | |||
| 62 | InB_ClampOSPos | |||
| 63 | InB_ClampITHm | |||
| 64 | InB_ClampITPos | |||
| 65 | InB_ClampISHm | |||
| 66 | InB_ClampISPos | |||
| 67 | InB_Spin1Hm | |||
| 68 | InB_Spin2Hm | |||
| 69 | InB_Spin3Hm | |||
| 70 | InB_Spin4Hm | |||
| 71 | InB_Spin5Hm | |||
| 72 | InB_Spin6Hm | |||
| 73 | InB_Spin7Hm | |||
| 74 | InB_Spin8Hm | |||
| 75 | InB_Spin1Ou | |||
| 76 | InB_Spin2Ou | |||
| 77 | InB_Spin3Ou | |||
| 78 | InB_Spin4Ou | |||
| 79 | InB_Spin5Ou | |||
| 80 | InB_Spin6Ou | |||
| 81 | InB_Spin7Ou | |||
| 82 | InB_Spin8Ou | |||
| 83 | InB_Spin1DPOu | |||
| 84 | InB_Spin6DPOu | |||
| 85 | InB_Spin1DPHm | |||
| 86 | InB_Spin6DPHm | |||
| 87 | InB_ServYOk | |||
| 88 | InB_ServZOk | |||
| 89 | InB_ServROk | |||
| 90 | X27 | InB_InvSpinOk | Inverter OK input - High when Inverter is OK | |
| 91 | InB_24vModOk | |||
| 92 | X20 | InB_GuardFront | ||
| 93 | X21 | InB_GuardRear | ||
| 94 | InB_Spin1DPOu
DPTO1 |
|||
| 95 | InB_Spin2DPOu | |||
| 96 | InB_Spin3DPOu | |||
| 97 | InB_Spin4DPOu | |||
| 98 | InB_Spin5DPOu
DPTO5 |
|||
| 99 | InB_Spin6DPOu | |||
| 100 | InB_Spin7DPOu | |||
| 101 | InB_Spin8DPOu | |||
| 102 | InB_DPHm1 | |||
| 103 | InB_DPHm2 | |||
| 104 | InB_DPHm3 | |||
| 105 | InB_DPHm4 | |||
| 106 | InB_DPHm5 | |||
| 107 | InB_DPHm6 | |||
| 108 | InB_DPHm7 | |||
| 109 | InB_DPHm8 | |||
| 110 | InB_Lubricator | Auto Lubricator on Autoflow Module B | ||
| 111 | InB_ClVTHm | Clamp V Notch Top Home | ||
| 112 | InB_ClVSHm | Clamp V Notch Side Home | ||
| 113 | InA_FullLen1 | Full Length sensor 1 on main infeed | ||
| 114 | InA_FullLen2 | Full Length sensor 2 on main infeed | ||
| 115 | InE_FullLen1 | Full Length sensor 1 on saw infeed | ||
| 116 | InE_FullLen2 | Full Length sensor 2 on saw infeed | ||
| 117 | InA_ESRearMid | Estop button on rear of machine (estimated to be halfway down the length) | ||
| 118 | InB_ESCabinet | Estop button on cabinet door | ||
| 119 | InF_ESRear | Saw Rear Estop Button | ||
| 120 | InF_SYHome | |||
| 121 | InF_SYLimitF | |||
| 122 | InF_SYLimitR | |||
| 123 | InF_SZHome | |||
| 124 | InF_SZLimitF | |||
| 125 | InF_SZLimitR | |||
| 126 | InF_SRHome | |||
| 127 | InF_SRLimitF | |||
| 128 | InF_SRLimitR | |||
| 129 | InC_ESRearMid | Estop button on rear of module c (estimated halfway down the length of frame) | ||
| 130 | InC_ESRearEnd | Estop button on rear of module c towards extraction end | ||
| 131 | InA_ESRearEnd | Estop button on rear of Module A | ||
| 134 | X14 | InF_EjPushHm | ||
| 135 | InF_EjPushOu | |||
| 136 | InF_ClampOTHm | |||
| 137 | InF_ClampOSHm | |||
| 138 | InF_ClampITHm | |||
| 139 | InF_ClampISHm | |||
| 140 | InF_RollerITHm | |||
| 141 | InF_EjectHm | |||
| 142 | InF_EjectOu | |||
| 143 | InF_AdvanceBut
InF_ConvAFwd |
|
||
| 144 | InF_OutfeedFull | |||
| 145 | X145 | InF_OutfeedIndex
InF_OutIx |
|
|
| 146 | X146 | InF_OutBrake | Sturtz Outfeed conveyor brake | |
| 148 | InF_Tilt1 | |||
| 149 | InF_Tilt2 | |||
| 150 | InF_InvSawOk | |||
| 151 | InF_InvExtractOk | |||
| 152 | InF_ConvOvlOk | |||
| 153 | InF_MatlOvlOk
InF_ConvXBOk |
|||
| 154 | InF_ConvTempOk | |||
| 155 | InF_ClampITPos | |||
| 156 | InF_TiltHome | |||
| 157 | InF_TiltSawOn | |||
| 158 | InF_JXDatum | JX Axis (Eject servo) Datum | ||
| 159 | ||||
| 160 | InA_AutoCycleButton | |||
| 160 | In_AUTO | MH Auto Button | ||
| 161 | InA_MatlAtFence | |||
| 162 | InG_EstopA | Soenen Outfeed System Estop Button A | ||
| 163 | InG_EstopB | Soenen Outfeed System Estop Button B | ||
| 164 | InG_EstopC | Soenen Outfeed System Estop Button C | ||
| 165 | InA_StopSensor | InE_StopSensor on ZX5
Sturtz Infeed Paddle Stop Up |
||
| 166 | InA_ButLoad | |||
| 167 | InC_GrippedMax | |||
| 168 | InE_GrippedMax | |||
| 169 | ||||
| 170 | InF_GuardFr | |||
| 171 | InF_GuardTop | |||
| 172 | InF_ServSZOk | |||
| 173 | InF_ServSROk | |||
| 174 | InF_ESRear | |||
| 175 | InA_48vOk | |||
| 176 | InB_24vBusOk | |||
| 177 | InB_VNotchOk | |||
| 178 | InF_48vOk | |||
| 179 | InF_24vBusOk | |||
| 180 | InF_24vModOk | |||
| 181 | InA_GripTurnHm | |||
| 182 | InA_GripTurnOu | |||
| 183 | InA_EDLoaded | |||
| 184 | InA_EDCoverOpen | |||
| 185 | InA_EDPlungeHm | |||
| 186 | InA_EDPlungeOu | |||
| 187 | InA_EDStartBut | |||
| 188 | InA_EDInverterOk | |||
| 189 | InF_GtOpen | Outfeed Safety Gate Closed | ||
| 190 | X19 | InF_GtClosed | Outfeed Safety Gate Open. Ecoline - Slide Door | |
| 191 | InF_Saw45 | |||
| 192 | InF_Saw90 | |||
| 193 | InF_EjOutfeedHm | Second Stage Eject Home (Autoflow Mk4) | ||
| 194 | InF_EjOutfeedOu | Second Stage Eject Out (Autoflow Mk4) | ||
| 195 | InF_ESSawFront | Estop button on front of Sawing centre | ||
| 196 | InF_SawGuard | |||
| 197 | InF_Saw135 | |||
| 198 | InF_SYHome2 | |||
| 199 | InF_SZHome2 | |||
| 201 | InA_AutoSaw | |||
| 202 | InF_ClampPadHm | Static Clamp Pad Home (Autoflow Mk4) | ||
| 203 | InF_CentHome | |||
| 204 | InA_StopSaw | |||
| 205 | InA_StartSaw | |||
| 206 | InF_EsRstSaw | |||
| 207 | InF_ExtrButt | |||
| 208 | InF_SawCutHm | |||
| 209 | InF_SawCutOut | |||
| 210 | InF_ZIA | Z Turret Infeed A Input | ||
| 211 | InF_ZOA | Z Turret Outfeed A Input | ||
| 212 | InF_ZIC | Z Turret Infeed C Input | ||
| 213 | InF_ZOC | Z Turret Outfed C Input | ||
| 214 | InF_ZIHome | Z Turret Infeed Home Input | ||
| 215 | InF_ZOHome | Z Turret Outfeed Home Input | ||
| 216 | InF_LowerEjHm | Lower eject system home Autoflow Mk4 | ||
| 217 | InF_LowerEjOu | Lower eject system out Autoflow Mk4 | ||
| 218 | InA_AccessDoor | Bruhl gate opened on Sturtz Infeed AFMk4 | ||
| 219 | InG_AccessDoor | Bruhl gate opened in Outfeed area AFMk4 | ||
| 220 | InF_ZIB | Z Turret Infeed B Input | ||
| 221 | InF_ZOB | Z Turret Outfeed B Input | ||
| 223 | X18 | InA_ButEStop5 | Ecoline - Conveyor Button | |
| 225 | InE_SXHome | |||
| 225 | InA_DatumSaw | |||
| 226 | InE_MatLoaded | Profile in Saw Loading Channel | ||
| 227 | InD_ExtGate1 | Extraction Gate 1 Open | ||
| 228 | InD_ExtGate2 | Extraction Gate 2 Open | ||
| 230 | InE_TrPos1 | Nearest Saw side | ||
| 231 | InE_TrPos2 | |||
| 232 | InE_TrPos3 | |||
| 233 | InE_TrPos4 | |||
| 234 | InE_TrPos5 | |||
| 235 | InE_TrPos6 | |||
| 236 | InE_TrPosEnd | Nerest MH side | ||
| 237 | InD_CrankO | |||
| 237 | InE_CrankFwd | |||
| 238 | InD_CrankH | |||
| 238 | InE_CrankHome | |||
| 239 | InE_TrLiftUp | |||
| 240 | InE_TrLiftDown | |||
| 241 | InE_TrLiftIn | |||
| 242 | InE_TrLiftOut | |||
| 243 | InE_TranOvl | |||
| 244 | InE_InfeedGate | |||
| 244 | In_LightGuard | |||
| 245 | InE_XferOn | |||
| 246 | X07 | InE_Laser | ||
| 247 | InB_Vsafe | Sensor for ZX5 V notch assembly safe position (Y and Z position clear of beam) | ||
| 248 | InE_MatPopup | Profile present in Saw side loader | ||
| 249 | InE_ESRearMid | Estop button on rear of saw infeed (estimated halfway down the frame) | ||
| 250 | InE_ESRearEnd | Estop button on rear of saw infeed (extraction end) | ||
| 251 | InA_VorBack | Sturtz Infeed Forward Carriage Back (Vorlaufwagen) | ||
| 252 | InA_VorFwd | Sturtz Infeed Forward Carriage Fwd | ||
| 253 | InA_VorUp | Sturtz Infeed Forward Carriage Clamp Up | ||
| 254 | InA_VorDn | Sturtz Infeed Forward Carriage Clamp Down | ||
| 255 | InA_GSGrip | Sturtz Infeed Grip Profile Short Grip (Shorter of the two cylinders) | ||
| 256 | InA_GSOff | Sturtz Infeed Grip Profile Short Open | ||
| 257 | InA_GLGrip | Sturtz Infeed Grip Profile Long Grip (longer of the two cylinders)
Input Ref 001 is used for the off sensor longer one as mimics grip released) |
||
| 258 | InA_Turn0 | Sturtz Infeed Grip Turn Cylinder (0degrees ) | ||
| 259 | InF_EjectHmI | Autoflow Mk4 Infeed Side Eject Home (back to back cylinder) | ||
| 260 | InF_EjectOuI | Autoflow Mk4 Infeed Side Eject Out (back to back cylinder) | ||
| 261 | ||||
| 262 | InA_StopDn | Sturtz Infeed Paddle Stop Down | ||
| 263 | InA_GRTRotated | Sturtz Infeed Guide Roller Turn Cylinder Rotated | ||
| 264 | InA_GRTOpen | Sturtz Infeed Guide Roller Turn Cylinder Initial | ||
| 265 | InA_GRHClamped | Sturtz Infeed Guide Roller Height Cylinder Clamped | ||
| 266 | InA_GRHOpen | Sturtz Infeed Guide Roller Height Cylinder Open | ||
| 267 | InA_Turn90 | Sturtz Infeed Grip Turn Cylinder Down (90 degrees) | ||
| 268 | InA_NextBarOut | |||
| 269 | InF_SawCutOutMid | |||
| 270 | InA_MatPos1
InA_MatPos1A |
Module A Material in Position 1
Sturtz Infeed 1st Place A |
||
| 271 | InA_MatPos2
InA_MatPos1B |
Module A Material in Position 2
Sturtz Infeed 1st Place B (closest to backfence) |
||
| 272 | InA_MatPos3
InA_MatPos7A |
Module A Material in Position 3
Sturtz Infeed 7th Place A |
||
| 273 | InA_MatPos4
InA_MatPos7B |
Module A Material in Position 4
Sturtz Infeed 7th Place B (closest to backfence) |
||
| 274 | InA_MatPos5
InA_MatPos8A |
Module A Material in Position 5
Sturtz Infeed 8th Place A |
||
| 275 | InA_MatPos6
InA_MatPos8B |
Module A Material in Position 6
Sturtz Infeed 8th Place B (closest to backfence) |
||
| 276 | InA_MatPosE | Module A Material in Position 7 | ||
| 277 | InA_CrankO | Module A Crank Out | ||
| 278 | InA_CrankH | Module A Crank Home | ||
| 279 | InA_CrankOvl | Module A Crank Overload | ||
| 280 | InA_ModClear | Module A Loading Channel Clear | ||
| 281 | InA_LoadBut | Module A Material Load button | ||
| 282 | InA_Resume | Module A Resume Sequence Button | ||
| 283 | InC_GripHH | Datum Drill Overload | ||
| 285 | InC_CrankOvl | Module C Crank Overload | ||
| 286 | InC_CrankO | Module C Crank Out | ||
| 287 | InC_CrankH | Module C Crank Home | ||
| 288 | InE_CrankOvl | |||
| 289 | InC_BeamPosH | Sensor used to detect when beam is home and safe | ||
| 290 | InC_BeamPosO | Sensor used to detect when beam is closest to ring | ||
| 291 | InE_GripHH | Module E Grip Height Home | ||
| 292 | X292 | InF_LiftUp | Sturtz Outfeed Lift Station Up | |
| 293 | X293 | InF_LiftDn | Sturtz Outfeed Lift Station Down | |
| 294 | InE_GripSw | Module E Grip Switch | ||
| 297 | InE_CrankO | Module E Crank Out | ||
| 298 | InE_CrankH | Module E Crank Home | ||
| 299 | InE_CrankOvl | Module E Crank Overload | ||
| 300 | InF_Resume | Module F Resume Sequence Button | ||
| 302 | InA_DDrillH | Datum Drill Out | ||
| 302 | InA_WheelH | Module A Wheel Height Home | ||
| 301 | InA_DDrillO | Datum Drill Home | ||
| 303 | InA_ChanHome | Module A Channel Home | ||
| 304 | InA_GripHH | Module C Grip Height Home | ||
| 304 | In_GUARD | Guard input on Mk3 Flowline | ||
| 305 | In_MCSW2 | |||
| 306 | InA_Preload | Module A Preload position | ||
| 307 | InE_ChanHm | Module E Channel Home | ||
| 308 | InB_InvZero | Output from Yaskawa inverter to confirm spindle has decelerated | ||
| 309 | InB_InvTemp | Thermistor on Yaskawa dump resistor for thermal overload | ||
| 310 | In_CFEED | Used on Mk3 - similar to CHAIN but needs to be different | ||
| 311 | In_LOADD | Material Loaded Sensor | ||
| 312 | X12 | In_Xok | Added by BB - not Required on TwinCAT | |
| 313 | X100 | In_Yok | Added by BB - not Required on TwinCAT | |
| 314 | X101 | In_Zok | Added by BB - not Required on TwinCAT | |
| 315 | X102 | In_Rok | Added by BB - not Required on TwinCAT | |
| 316 | X09 | In_Gok | Added by BB - not Required on TwinCAT | |
| 317 | In_SXok | Added by BB | ||
| 318 | X11 | In_Vok | Added by GG for Ecoline - not Required on TwinCAT | |
| 321 | In_ESBUT1 | Or saw front Estop button on ZX3/4 Allinone | ||
| 324 | In_TRTA | |||
| 326 | InA_ConvOvl | Infeed conveyor overload | ||
| 327 | X45 | In_LLEN | Longlength sensor on Mk3 | |
| 328 | X40 | In_EJHM | Eject Push Home 1 | |
| 329 | In_TOOLO | Tool Out sensor on Flowline Mk3 | ||
| 330 | X34 | In_OBEAM | Ecoline Outfeed Beam | |
| 331 | In_OUTFC | |||
| 332 | In_OCUT1 | |||
| 333 | In_OCUT2 | |||
| 334 | In_OCUT3 | |||
| 335 | In_OCUT4 | |||
| 336 | In_OCUT5 | |||
| 337 | In_OCUT6 | |||
| 338 | In_OCUT7 | |||
| 339 | In_OCUT8 | |||
| 340 | X42 | In_EJOU | Eject Push Out (1) | |
| 341 | X26 | In_VOVL | V Notch overload | |
| 342 | X342 | InB_InvOK | Alternative inverter OK input (ZX5) | |
| 343 | In_IPLLH | |||
| 344 | X32 | In_IPLLO | ||
| 345 | In_CHAIN | Chain Sensor | ||
| 346 | InB_GuardFrI | Guard doors on ZX5 (no TwinSAFE) | ||
| 347 | InB_GuardFrO | Guard doors on ZX5 (no TwinSAFE) | ||
| 348 | InB_GuardReI | Guard doors on ZX5 (no TwinSAFE) | ||
| 349 | InB_GuardReO | Guard doors on ZX5 (no TwinSAFE) | ||
| 350 | InD_GuardTT | Guard Doors on transfer Table | ||
| 351 | InF_ESConsBut | |||
| 352 | X48 | In_SIHH | Microline Saw Clamp Infeed Horizontal Home | |
| 353 | X49 | In_SOHH | Microline Saw Clamp Outfeed Horizontal Home | |
| 354 | X354 | InF_AAPickUp | Applicator Pick up sensor (Label Applicator) | |
| 355 | X355 | InF_AAPickDn | Applicator Pick down sensor (Label Applicator) | |
| 356 | X356 | InF_AAPlaceHm | Applicator Place printer position sensor (Label Applicator) | |
| 357 | X357 | InF_AAPlaceOu | Applicator Place profile position sensor (Label Applicator) | |
| 358 | X358 | InF_AATiltHm | Applicator straight sensor (Label Applicator) | |
| 359 | X359 | InF_AATiltOu | Applicator angled sensor (Label Applicator) | |
| 360 | X360 | InF_AALblPosA | Applicator turret sensor A (Label Applicator) | |
| 361 | X361 | InF_AALblPosB | Applicator turret sensor B (Label Applicator) | |
| 362 | X362 | InF_AALblPosC | Applicator turret sensor C (Label Applicator) | |
| 363 | X363 | InF_AAPickPrf | Applicator Pick "on profile" position sensor | |
| 364 | X364 | InF_AALblSense | Label sensor on printer to see if a peel-off label is present | |
| 367 | X15 | In_CLIPH | Microline Saw Clamp Infeed Positioner Home | |
| 368 | X16 | In_CLOPH | Microline Saw Clamp Outfeed Positioner Home | |
| 369 | X45 | In_CutFailSafe | Microline Saw Cut Fail Safe | |
| 377 | X37 | In_EJHM2
InF_EjPushHmB |
Eject Push Home 2 | |
| 378 | X44 | In_EJOU2
InF_EjPushOuB |
Eject Push Out 2 | |
| 380 | X15 | In_CLVSI | V Clamp Infeed Side Home Ecoline | |
| 381 | X13 | In_CLVSO | V Clamp Outfeed Side Home Ecoline | |
| 382 | X25 | In_SpOVL | Spindle overload relay | |
| 383 | X39 | In_VTrnDn | Ecoline Front V turn Down | |
| 384 | X40 | In_VTrnUp | Ecoline Front V turn up | |
| 385 | X43 | In_WTrnDn | Ecoline Rear V turn Down | |
| 386 | X44 | In_WTrnUp | Ecoline Rear V turn up | |
| 387 | X47 | In_Length | Ecoline Bar end sensor (not used) | |
| 388 | X388 | InA_ConvBrk | Sturtz Infeed Conveyor Braking Sensor - Position to stop for index pulse | |
| 389 | X389 | InA_PtB1Hm | Sturtz Infeed Push To Backfence 1 Open | |
| 390 | X390 | InA_PtB2Hm | Sturtz Infeed Push To Backfence 2 Open | |
| 391 | X391 | InA_PtB3Hm | Sturtz Infeed Push To Backfence 3 Open | |
| 392 | X392 | InA_PtB4Hm | Sturtz Infeed Push To Backfence 4 Open | |
| 393 | X393 | InA_PtB5Hm | Sturtz Infeed Push To Backfence 5 Open | |
| 394 | X394 | InA_PtB6Hm | Sturtz Infeed Push To Backfence 6 Open | |
| 395 | X395 | InA_PtB7Hm | Sturtz Infeed Push To Backfence 7 Open | |
| 396 | X396 | InA_LiftUp | Sturtz Infeed Roller Lift Up | |
| 397 | X397 | InA_LiftDn | Sturtz Infeed Roller Lift Dn | |
| 398 | X398 | InA_StopDn | Sturtz Infeed Paddle Stop Down | |
| 399 | X399 | InF_PrfPosA | Soenen Outfeed Profile At Eject Pos A | |
| 400 | X400 | InF_PrfPosB | Soenen Outfeed Profile At Eject Pos B | |
| 401 | X401 | InF_ConvXAOk | Soenen Outfeed Direction X Position A Conveyor Ok (Overload) | |
| 402 | X402 | InF_ConvYAOk | Soenen Outfeed Direction X Position B Conveyor Ok (Running) | |
| 403 | X403 | InF_ConvYBOk | Soenen Outfeed Direction Y Position B Conveyor Ok (Running) | |
| 404 | ||||
| 405 | SPTO1 | Tool Out Sensor on ZX | ||
| 406 | SPTO2 | |||
| 407 | SPTO3 | |||
| 408 | SPTO4 | |||
| 409 | SPTO5 | |||
| 410 | SPTO6 | |||
| 411 | SPTO7 | |||
| 412 | SPTO8 | |||
| 413 | SPHM1 | Tool Home Sensor on ZX | ||
| 414 | SPHM2 | |||
| 415 | SPHM3 | |||
| 416 | SPHM4 | |||
| 417 | SPHM5 | |||
| 418 | SPHM6 | |||
| 419 | SPHM7 | |||
| 420 | SPHM8 | |||
| 421 | DPTO3 | Double Plunge out Sensor on ZX | ||
| 422 | DPTO7 | |||
| 423 | In_VIURH2 | |||
| 424 | In_VOURH2 | |||
| 425 | In_CLOIH | |||
| 426 | In_CLOOH | |||
| 427 | X427 | InF_CLHOpen | Sturtz Outfeed Horizontal Clamp Open | |
| 428 | X428 | InF_MatPos1A | Sturtz Outfeed Material At Operator A | |
| 429 | X429 | InF_MatPos1B | Sturtz Outfeed Material At Operator B | |
| 430 | X430 | InF_MatPos7A | Sturtz Outfeed Material In Pos Rear A | |
| 431 | X431 | InF_MatPos7B | Sturtz Outfeed Material In Pos Rear B | |
| 432 | ||||
| 433 | X433 | InF_ConvARev | Soenen Conveyor A Rev Button | |
| 434 | X434 | InF_ConvBFwd | Soenen Conveyor B Fwd Button | |
| 435 | X435 | InF_ConvARev | Soenen Conveyor B Rev Button | |
| 436 | X436 | InF_FullA2 | Soenen Conveyor A Full #2 | |
| 437 | X437 | InF_FullB1 | Soenen Conveyor B Full #1 | |
| 438 | X438 | InF_FullB2 | Soenen Conveyor B Full #2 | |
| 439 | ||||
| 440 | X440 | In_GripHIxA | Grip Height Index A (Gripper Variable Height Upgrade) | |
| 441 | X441 | In_GripHIxB | Grip Height Index B (Gripper Variable Height Upgrade) | |
| 442 | X442 | In_GripHIxC | Grip Height Index C (Gripper Variable Height Upgrade) | |
| 449 | InC_RrSlideGrd | Rear Sliding Door on Ecoline | ||
| 450 | In_WOVL | |||
| 451 | X10 | In_DATV | ||
| 452 | In_DATW | |||
| 453 | In_WICTH | |||
| 453 | X42 | InB_WCutUp | Ecoline Rear V Notch Up | |
| 454 | In_WICTO | |||
| 454 | X41 | InB_WCutDn | Ecoline Rear V Notch Down | |
| 455 | In_WOCTH | |||
| 456 | In_WOCTO | |||
| 457 | In_VIURH1 | |||
| 458 | In_VOURH1 | |||
| 459 | X38 | InB_VCutUp | ||
| 460 | X37 | InB_VCutDn | ||
| 461 | InA_TeethIn | ModuleA Teeth Located OK | ||
| 462 | InC_TeethIn | ModuleC Teeth Located OK | ||
| 463 | InE_TeethIn | ModuleE Teeth Located OK | ||
| 464 | InA_WheelOvl | Infeed Wheel Overload | ||
| 465 | InA_Beam1 | Infeed Safety Beam 1 | ||
| 466 | InA_Beam2 | Infeed Safety Beam 2 | ||
| 467 | InA_WheelRun | Infeed Wheel Running | ||
| 468 | InA_ConvRun | Infeed Conveyor Running | ||
| 469 | InF_Beam1 | Saw Outfeed Safety Beam 1 | ||
| 470 | InF_Beam2 | Saw Outfeed Safety Beam 2 | ||
| 471 | InC_SlowX | Slowdown Input for Drive X (Direct input to drive) | ||
| 472 | InE_SlowSX | Slowdown Input for Drive SX (Direct input to drive) | ||
| 473 | InC_EjectFlap | Input for Eject Safety Flap on Ecoline | ||
| 474 | InG_ConvRun | Input for Outfeed Conveyor Running | ||
| 488 | In_TLBRK | |||
| 489 | InB_SpTemp
SPTH1 |
Spindle Thermal Sensor | ||
| 490 | SPTH2 | |||
| 491 | SPTH3 | |||
| 492 | SPTH4 | |||
| 493 | SPTH5 | |||
| 494 | SPTH6 | |||
| 495 | SPTH7 | |||
| 496 | SPTH8 | |||
Draft
Français
English
Deutsch
Español
Italiano
Português