WinMulti Master Directory Files

Auteur avatarGareth Green | Dernière modification 1/07/2022 par Gareth Green en cours de rédaction

Pas encore d'image

Mul File Main Page

Overview

The master directory contains all the information required to run the winMulti software. This folder is referenced in the Masterdir File and could be located anywhere, but is generally found in the following locations

Common Locations
Configuration Location Notes
Latest Machines with centralised control

(Zx5s and bechoff upgraded flowlines, software upgrades to v6)

c:\ddrive\
Machines with front end winMulti on a beckhoff PC
d:\

(Memory Stick or network drive)

A USB stick was originally used to minimise the use of hard drive space, and to provide a simple method of PC replacement. However a memory stick will corrupt after a couple of years of use, and the general change to use a shared directory on another PC was adopted.
Machines with a seperate machine and saw hardware configuration

(original flowlines and ZX3/4)

c:\multi\
Oldest DOS Machines c:\


.Mul and .Saw Files

.mul and .saw files are text files, normally csv that hold the setup data for the winMulti software

...These files are standard ASCII text files becasue they were originally conceived pre-1995 for DOS based systems and have maintained compatiblity


No File Name Description Location
1 Adjust https://stuga.dokit.app/wiki/Mul_File_Specification_-_Adjust
2 Alarms https://stuga.dokit.app/wiki/Mul_File_Specification_-_Alarms
3 Alarmsfull https://stuga.dokit.app/wiki/Mul_File_Specification_Alarmsfull
4 Axes https://stuga.dokit.app/wiki/Mul_File_Specification_-_Axes
5 AxesLR https://stuga.dokit.app/wiki/Mul_File_Specification_-_AxesLR
6 Backup https://stuga.dokit.app/wiki/Mul_File_Specification_Backup
7 Clamppos https://stuga.dokit.app/wiki/Mul_File_Specification_-_Clamppos
8 Clamps https://stuga.dokit.app/wiki/Mul_File_Specification_-_Clamps
9 Colours https://stuga.dokit.app/wiki/Mul_File_Specification_-_Colours
10 Draw https://stuga.dokit.app/wiki/Mul_File_Specification_-_Draw
11 DualColours https://stuga.dokit.app/wiki/Mul_File_Specification_-_DualColours
12 Ejpos https://stuga.dokit.app/wiki/Mul_File_Specification_-_Ejpos
13 etherCatDevices https://stuga.dokit.app/wiki/Mul_File_Specification_-_EtherCatDevices
14 Hardware https://stuga.dokit.app/wiki/Mul_File_Specification_-_Hardware
15 Inverters https://stuga.dokit.app/wiki/Mul_File_Specification_-_Inverters
16 IODef https://stuga.dokit.app/wiki/Mul_File_Specification_-_ioDef
17 IODefTS https://stuga.dokit.app/wiki/Mul_File_Specification_-_IoDefTS
18 IP https://stuga.dokit.app/wiki/Mul_File_Specification_-_IP
19 Opttol https://stuga.dokit.app/wiki/Mul_File_Specification_-_Opttol
20 Optypes https://stuga.dokit.app/wiki/Mul_File_Specification_-_Optypes
21 Osensor.mul https://stuga.dokit.app/wiki/Mul_File_Specification_Osensor
22 Peps https://stuga.dokit.app/wiki/Mul_File_Specification_-_Peps
23 Preps https://stuga.dokit.app/wiki/Mul_File_Specification_-_Preps
24 Profile https://stuga.dokit.app/wiki/Mul_File_Specification_-_Profile
25 Queueno https://stuga.dokit.app/wiki/Mul_File_Specification_-_Queueno
26 Reminders https://stuga.dokit.app/wiki/Mul_File_Specification_-_Reminders
27 Settings https://stuga.dokit.app/wiki/Mul_File_Specification_-_Settings
28 Shifts https://stuga.dokit.app/wiki/Mul_File_Specification_-_Shifts
29 StdColours https://stuga.dokit.app/wiki/Mul_File_Specification_-_StdColours
30 StdOps https://stuga.dokit.app/wiki/Mul_File_Specification_-_Stdops
31 Systems https://stuga.dokit.app/wiki/Mul_File_Specification_-_Systems
32 Tools https://stuga.dokit.app/wiki/Mul_File_Specification_-_Tools
33 Trim https://stuga.dokit.app/wiki/Mul_File_Specification_-_Trim
34 userVariables https://stuga.dokit.app/wiki/Mul_File_Specification_-_userVariables
35 Zposhold https://stuga.dokit.app/wiki/Mul_File_Specification_-_Xposhold
36 Zstdopdef https://stuga.dokit.app/wiki/Mul_File_Specification_-_Zstdopdef

Commentaires

Draft