| [version en cours de rédaction] | [version en cours de rédaction] |
m (Gareth Green a déplacé la page Mul File Main Page vers WinMulti Master Directory Files : Better Naming) |
|||
| Ligne 4 : | Ligne 4 : | ||
|Tags=Mul | |Tags=Mul | ||
}} | }} | ||
| − | <translate>= | + | <translate>= Overview = |
| + | The master directory contains all the information required to run the winMulti software. This folder is referenced in the [[Masterdir File]] and could be located anywhere, but is generally found in the following locations | ||
| + | {| class="wikitable" | ||
| + | |+Common Locations | ||
| + | ! | ||
| + | !Configuration | ||
| + | !Location | ||
| + | !Notes | ||
| + | |- | ||
| + | |Latest | ||
| + | |Machines with centralised control | ||
| + | (Zx5s and bechoff upgraded flowlines, software upgrades to v6) | ||
| + | |c:\ddrive\ | ||
| + | | | ||
| + | |- | ||
| + | | | ||
| + | |Machines with front end winMulti on a beckhoff PC<br /> | ||
| + | |d:\ | ||
| + | (Memory Stick or network drive) | ||
| + | |A USB stick was originally used to minimise the use of hard drive space, and to provide a simple method of PC replacement. However a memory stick will corrupt after a couple of years of use, and the general change to use a shared directory on another PC was adopted. | ||
| + | |- | ||
| + | | | ||
| + | |Machines with a seperate machine and saw hardware configuration | ||
| + | (original flowlines and ZX3/4) | ||
| + | |c:\multi\ | ||
| + | | | ||
| + | |- | ||
| + | |Oldest | ||
| + | |DOS Machines | ||
| + | |c:\ | ||
| + | | | ||
| + | |} | ||
<br /> | <br /> | ||
| − | + | =.Mul and .Saw Files= | |
| + | .mul and .saw files are text files, normally csv that hold the setup data for the winMulti software | ||
| + | {{Info|...These files are standard ASCII text files becasue they were originally conceived pre-1995 for DOS based systems and have maintained compatiblity}}<br /> | ||
{| class="wikitable" | {| class="wikitable" | ||
|+ | |+ | ||
Version du 29 juin 2022 à 08:32
Mul File Main Page
Overview
The master directory contains all the information required to run the winMulti software. This folder is referenced in the Masterdir File and could be located anywhere, but is generally found in the following locations
| Configuration | Location | Notes | |
|---|---|---|---|
| Latest | Machines with centralised control
(Zx5s and bechoff upgraded flowlines, software upgrades to v6) |
c:\ddrive\ | |
| Machines with front end winMulti on a beckhoff PC |
d:\
(Memory Stick or network drive) |
A USB stick was originally used to minimise the use of hard drive space, and to provide a simple method of PC replacement. However a memory stick will corrupt after a couple of years of use, and the general change to use a shared directory on another PC was adopted. | |
| Machines with a seperate machine and saw hardware configuration
(original flowlines and ZX3/4) |
c:\multi\ | ||
| Oldest | DOS Machines | c:\ |
.Mul and .Saw Files
.mul and .saw files are text files, normally csv that hold the setup data for the winMulti software
Draft
Français
English
Deutsch
Español
Italiano
Português