TB0431 Samsung Drive Parameter Setup

Cette page contient des modifications qui ne sont pas marquées pour la traduction.

Auteur avatarAnonymous | Dernière modification 24/02/2020 par Gareth Green en cours de rédaction

How to set up a new or replacement Samsung drive using the jogger.

Étape 1 - Open Factory Settings Document

You must first gather all relevant information before reading from the Document. You must have:

  • Machine type (Router, Ecoline e.t.c)
  • Handing
  • Axis

Factory settings available here

Étape 2 - Power Drive + Plug in Jogger

Using a stripped plug and making sure there is no power going through the plug during installation:

  1. Live wire (Brown) in the top port
  2. Neutral wire (Blue) in the second port
  3. Ground wire (Green + Yellow) in the bottom port
  4. The Joggers Serial port
  5. Plug in and turn on plug



Étape 3 - Jog on and Set

  1. Once power is on press JOG ON
  2. Now keep pressing MODE until the screen outputs SEt-01
  3. Press ENTER to change the parameter.
  4. Change number in the setting and press MODE/SET to confirm.
  5. Press ENTER again to come out of the perimeter.
  6. Make your way through the list making sure you press MODE/SET each time to save the parameter.



Étape 4 - CHECK, DOUBLE CHECK

After this go through the perimeters AGAIN. This is important as they can easily be set wrong.

Étape 5 - Power Down

UNPLUG from power source and power down removing all peripherals for delivery.

Étape 6 - Power Down

UNPLUG from power source and power down removing all peripherals for delivery.

Commentaires

Draft