Consumables List

This page contains changes which are not marked for translation.

Author avatarStuga Engineer | Last edit 25/09/2024 by Gareth Green being drafted

Stuga Machinery Consumables List

Parts List

Photo Part Number Product Description Autoflow ZX5 ZX5-E ZX4 ZX3 Flowline Microline Ecoline Saw Other Information
V0000001.jpg
V0000001 8mm Coated Cutters Coated cutters are low performance and not suitable for machines with high-speed spindles
V0000002.jpg
V0000002 5mm Coated Cutters Coated cutters are low performance and not suitable for machines with high-speed spindles
V0000012
V0000012 10mm Coated Cutters Coated cutters are low performance and not suitable for machines with high-speed spindles
V0000013
V0000013 12.7mm Coated Cutters Coated cutters are low performance and not suitable for machines with high-speed spindles
V0000039 4mm Coated Cutters Coated cutters are low performance and not suitable for machines with high-speed spindles
V0000035
V0000035 5mm Carbide Cutters (pointed end)
V000036
V0000036 10mm Single Flute Carbide Cutters
V0000037
V0000037 12.7mm Carbide Cutters
V0000042
V0000042 5mm Carbide Single Flute Cutters   
V0000045
V0000045 5mm Twin Flute Carbide Cutters
V0000046
V0000046 10mm Twin Flute Carbide Cutters
V0000047
V0000047 12.7mm Twin Flute Carbide Cutters
V0000048
V0000048 17mm Carbide Cutters
V0000051 16mm Carbide Cutters-Quad
T0000100
T0000100 3mm Drill bits
V0000004B
V0000004B 150mm ø V Notch Blades
V0000016B
V0000016B 200mm ø V Notch Blades Z018 onwards
V0000028B
V0000028B 300mm ø V Notch Blades Z001 to Z016
V0000028B-ZX5
V0000028B-ZX5 300mm ø ZX5 V Notch Blades
V0000034B
V0000034B 400mm ø Main Saw Blade - 120 teeth
V0000043B
V0000043B 500mm ø Main Saw Blade - 160 teeth Needs 500mm mechanical upgrade to suit on ZX3/4/5 Flowline & Saw
V0000053B
V0000053B 500mm ø Main Saw Blade - 120 teeth Please note: less Teeth on this blade
M0000253
M0000253 Anti Slip Pads (pack 24)
M0000454
M0000454 Ring Gear Lube
M0000493
M0000493 Lubricant with siolube & ptfe-aerosol
M0000494
M0000494 Lubricant with siolube & ptfe cartridge
M0000510
M0000510 Duck Oil 5ltr
M0001047 Grease Cartridge F03 Cartridge for Auto-Lubrication System
M0000151 Clear Poly bags
M0000179
M0000178 Extractor Filter Bag 8' x 20.5" dia.(Air Plants Extractor) Used on all new machines and refurbs since 2012
M0000190.jpg
M0000189 Extractor Filter Bag 4' x 20.5" dia (Air Plants Extractor)


ONLY IF HEIGHT REDUCED

Used on all new machines and refurbs since 2012
Labels
M0000477 Labels for Baby Zebra Printer -White
Labels.jpg
M0000481 Labels for Baby Zebra Printer -Blue
Labels.jpg
M0000482 Labels for Baby Zebra Printer -Orange
Labels.jpg
M0000483 Labels for Baby Zebra Printer -Green
Labels.jpg
M0000484 Labels for Baby Zebra Printer -Red
Labels.jpg
M0000485 Labels for Baby Zebra Printer -Yellow
Labels.jpg
M0000492 Labels for Baby Zebra Printer -Grey
D0005152
D0005152 Chip Deflector Probes Only on Autoflows with Mk2 model saw backfences.
D0010679.jpg
D0010679 Autoflow Chip Deflector Probes (Mk1)
D0015447B Zx5 Chip Deflector Probes
D0001376.jpg
D0001376 Universal gripper insert Mk9+
D0010770.jpg
D0010990

D0010991


was 10770(-OH)

Autoflow Grip Finger Renumbered and named Sep 24 to correct handing confusion
E0000336.jpg
E0000336 Proximity Sensor-8mm threaded
E0000336L.jpg
E0000336L Proximity Sensor-8mm threaded (longer 4mm range)
E0000079.jpg
E0000079 Limit Switch - Roller Plunger
E0000161.jpg
E0000161 Limit Switch -Side Rotary Roller Lever
V0000006.jpg
V0000006 Flowline Espag Drill -10mm
V0000007.jpg
V0000007 Flowline Espag Drill -12mm
V0000023.jpg
V0000023 R/H Flute Cutter (Router Aly)
V0000024 Chipbreaker Speed Cutter -8mm
V0000025 Chipbreaker -10mm
V0000026.jpg
V0000026 Chipbreaker -12.7mm
B0000025.jpg
B0000025


-THERMAL

Saw blade V-Belts (400mm blade)


-THERMAL suffix is used for the 987mm version for some 500mm bladesystems

Pulley size differences mean there are 2 possible belt sizes for 500mm blade
B0001175 Saw blade V-Belts (500mm blade) Pulley size differences mean there are 2 possible belt sizes for 500mm blade
B0000071.jpg
B0000071 V-notch spindle V-belts (5 rib) Used only on Router
B0000115.jpg
B0000115 Spindle V belts (5 rib) Used only on Flowline Mk3 50Hz Blue motor
B0001041.jpg
B0001041 Vee Belt SPZX 0900 Autoflow saw belt
C0001294.jpg
C0001294 Zebra ZD421 Print head
C0001300.jpg
C0001300 Zebra ZD420D Printer head

Notes on Expected Life

Tooling life depends entirely on the type and amount of operations carried out at a particular manufacturer and can vary greatly.


Main Saw Blade (400 or 500mm)

  • Change for a sharpened blade every 100 hours of production
  • Have a blade change and sharpening regime
  • Generally, a blade can be sharpened around 25 times before disposal - this will vary depending on the sharpening 3rd party supplier

V Notch Saw Blades (150, 200 or 300mm)

  • Chipping can occur if a saw blade is too sharp - may need "back polishing" with emery cloth or stone
  • Life expectancy - 6 months

Tooling

  • Tool cut speed will affect tool life, along with profile factors such as pre-inserted plastic reinforcing, the chemistry of the profile and the number of webs the cutter has to cut through
  • Drainage cutter life depends on the use - eg upstand removal - all profile systems are different
  • Pre-reinforced profile has a huge, unpredictable effect on tooling life - see Use of Reinforcing on Stuga Machines
  • Tool life is impossible to predict - signs that the tool is wearing will be a noticeable change in tone of the cutter or stalling while cutting "heavy" cuts such as trickle vents through multiple skins

Comments

Published