Autocut Monthly Maintenance : Différence entre versions

[version en cours de rédaction]

Version du 3 octobre 2019 à 19:55

Carry out these checks once per month alongside daily and weekly checks

Auteur Gareth Green | Dernière modification 23/10/2019 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽

Pas encore d'image

Difficulté

Facile

Durée

20 minute(s)

Carry out these checks once per month alongside daily and weekly checks

Difficulté

Facile

Durée

20 minute(s)

Sommaire

1 Pièces et outils
2 Tutoriels prérequis
3 Étape 1 - Open the Guard doors
4 Étape 2 - Clean and Lubricate the Pusher Chain
5 Étape 3 - Lubricate Saw Lift Bearings
6 Étape 4 - Open the saw access hatch
7 Étape 5 - Lubricate Eject bearings
8 Étape 6 - Check Belts
9 Commentaires

autocut, monthly, maintenance

Pièces et outils
Tutoriels prérequis

Pièces et outils

Tutoriels prérequis

Étape 1 - Open the Guard doors

https://stuga.dokit.app/wiki/Autocut_Open_Guard_Doors

Étape 2 - Clean and Lubricate the Pusher Chain

Lubricate the chain every 500mm with a drop of oil - use a wire brush to really give a good clean at the same time.

Étape 3 - Lubricate Saw Lift Bearings

There are 4 grease nipples on the main saw blade assembly - 1 pump of grease is required for each nipple.

...If this is an older machine, the grease nipples may not be fitted. Oil the shafts instead

Étape 4 - Open the saw access hatch

This is the hatch below the eject table area - there is 4 x M6 bolts to take out

Étape 5 - Lubricate Eject bearings

There are 4 grease nipples under eject - 1 pump of grease is required for each nipple.

...If this is an older machine, the grease nipples may not be fitted. Oil the shafts instead

Étape 6 - Check Belts

Commentaires

en none 0 Draft

@@ Ligne 11 : / Ligne 11 : @@
 }}
 {{Materials
-|ItemList={{ItemList}}
+|ItemList={{ItemList
+|Item=Grease Gun
+}}{{ItemList
+|Item=Oil Can
+}}{{ItemList
+|Item=Wire Brush
+}}
+|Prerequisites={{Prerequisites}}
 }}
 {{EPI}}
 {{Tuto Step
-|Step_Title=<translate></translate>
+|Step_Title=<translate>Open the Guard doors</translate>
+|Step_Content=<translate>[[Autocut Open Guard Doors|https://stuga.dokit.app/wiki/Autocut_Open_Guard_Doors]]</translate>
+}}
+{{Tuto Step
+|Step_Title=<translate>Clean and Lubricate the Pusher Chain</translate>
+|Step_Content=<translate>Lubricate the chain every 500mm with a drop of oil - use a wire brush to really give a good clean at the same time.</translate>
+}}
+{{Tuto Step
+|Step_Title=<translate>Lubricate Saw Lift Bearings</translate>
+|Step_Content=<translate>There are 4 grease nipples on the main saw blade assembly - 1 pump of grease is required for each nipple.
+{{Info|...If this is an older machine, the grease nipples may not be fitted. Oil the shafts instead}}</translate>
+}}
+{{Tuto Step
+|Step_Title=<translate>Open the saw access hatch</translate>
+|Step_Content=<translate>This is the hatch below the eject table area - there is 4 x M6 bolts to take out</translate>
+}}
+{{Tuto Step
+|Step_Title=<translate>Lubricate Eject bearings</translate>
+|Step_Content=<translate>There are 4 grease nipples under eject - 1 pump of grease is required for each nipple.
+{{Info|...If this is an older machine, the grease nipples may not be fitted. Oil the shafts instead}}<br /></translate>
+}}
+{{Tuto Step
+|Step_Title=<translate>Check Belts</translate>
 |Step_Content=<translate></translate>
 }}
 {{Notes}}
 {{PageLang
+|Language=en
 |SourceLanguage=none
 |IsTranslation=0
-|Language=en
 }}
 {{Tuto Status
 |Complete=Draft
 }}