Changing Pneumax Valve slice

Instructions on how to change a Pneumax valve slice

Difficulté

Easy Facile

Durée

5 minute(s) minute(s)

Changing_Pneumax_Valve_slice_IMG_2481.jpg

Étape 1 - Undo fixing screws using small pozi Screwdriver.

Please ensure screwdriver is a good fit to avoid wearing the bolt head.

Étape 2 - Removing old Valve Slice

When removing the slice be careful not to bend the pins on the slice.

Also make sure the Valve Gasket piece does not fall out or go missing. This is needed to stop leaks.

Étape 3 - Fitting New Valve Slice

Again Please be careful when inserting the Pins

Étape 4 - Removing old Valve Slice

When removing the slice be careful not to bend the pins on the slice.

Also make sure the Valve Gasket piece does not fall out or go missing. This is needed to stop leaks.

Étape 5 - Fitting New Valve Slice

Again Please be careful when inserting the Pins. When tightening the Screws, screw in 2 turns on each of the screws until tight to ensure a square fit. Do not over tighten, the bolts will strip easily.

en none 0 Draft