| [version en cours de rédaction] | [en attente de relecture] |
| (2 révisions intermédiaires par 2 utilisateurs non affichées) | |||
| Ligne 7 : | Ligne 7 : | ||
|Duration=5 | |Duration=5 | ||
|Duration-type=minute(s) | |Duration-type=minute(s) | ||
| − | |Tags=Spindle, Datum | + | |Tags=Spindle, Datum, Change, Tool |
}} | }} | ||
{{Introduction | {{Introduction | ||
| Ligne 46 : | Ligne 46 : | ||
{{Tuto Step | {{Tuto Step | ||
|Step_Title=<translate>Changing Datum Spindle. (If necessary)</translate> | |Step_Title=<translate>Changing Datum Spindle. (If necessary)</translate> | ||
| − | |Step_Content=<translate>If the changed spindle is the datum spindle, this message will appear. A different spindle must be selected in the machines parameters. | + | |Step_Content=<translate>If the changed spindle is the datum spindle, this message will appear. A different spindle must be selected in the machines parameters. |
| + | |||
| + | The Datum tool is a Spindle fitted with a 10mm Tool | ||
<br /></translate> | <br /></translate> | ||
| Ligne 89 : | Ligne 91 : | ||
}} | }} | ||
{{Tuto Status | {{Tuto Status | ||
| − | |Complete= | + | |Complete=Published |
}} | }} | ||
Version actuelle datée du 9 juillet 2024 à 09:59
How to turn off a spindle and change the datum tool.
Difficulté
Facile
Durée
5 minute(s)
Sommaire
- 1 Étape 1 - Open win Multi
- 2 Étape 2 - Press on '[F5] Settings' tab
- 3 Étape 3 - Go to the tab “Tooling”
- 4 Étape 4 - Turning Spindle Off
- 5 Étape 5 - Save Changes
- 6 Étape 6 - Changing Datum Spindle. (If necessary)
- 7 Étape 7 - Parameters Change
- 8 Étape 8 - Setting New Datum Spindle
- 9 Étape 9 - Exit software to windows and restart WinMulti.
- 10 Commentaires
Étape 1 - Open win Multi
Étape 2 - Press on '[F5] Settings' tab
Étape 3 - Go to the tab “Tooling”
Étape 4 - Turning Spindle Off
Using the 'Spindle Setup' menu box, select the spindle to be turned off. Using the drop down arrow circled, change the spindle 'Tool' to <Empty>
Étape 5 - Save Changes
The selected spindle's 'Tool' should now be set to <Empty>. Now press Save.
Étape 6 - Changing Datum Spindle. (If necessary)
If the changed spindle is the datum spindle, this message will appear. A different spindle must be selected in the machines parameters.
The Datum tool is a Spindle fitted with a 10mm Tool
Étape 7 - Parameters Change
Go to the 'Parameters' tab. Then press on 'All' in the Filter box.
Étape 8 - Setting New Datum Spindle
Find the parameter 'Datum Spindle Number' Click to highlight this field.
Change the spindle using the drop down box under 'Edit'. Change the datum spindle to a working tool that has not been turned off. Then Press 'Save'
The Parameter will now update.
Étape 9 - Exit software to windows and restart WinMulti.
Published
Français
English
Deutsch
Español
Italiano
Português