Upgrading the motor and associated parts on conveyor R0000173
Difficulté
Facile
Durée
0 minute(s)
Introduction
The original style of conveyor is used on many machines, but the motor that powers it is no longer available. This guide will allow a different motor/gearbox to be used.
Étape 1 - Remove existing motor-g/box and fittings
Remove the existing motor-g/box, shaft and spider coupling
Étape 2 - Fit new conveyor motor mount plate
Using supplied fasteners, fit the new motor mount plate to the existing holes on the two upright brackets.
Étape 3 - Fit Motor
Fit motor, shaft and spider coupling
Étape 4 - Test
Test the motor for application
Draft
Français
English
Deutsch
Español
Italiano
Português