Sprint Drive C0000253 Setting Up

Cette page contient des modifications qui ne sont pas marquées pour la traduction.

Auteur avatarGareth Green | Dernière modification 21/01/2022 par Gareth Green en cours de rédaction

How to set up a Sprint Drive

Sommaire

Used on later Ecolines with Baldor control system

Now obsolete

The following notes are the remaining setup instructions


this needs to be supplied with 10v (-sp/com and +sp)

Also needs 36v supplied (V- and V+)

Then connect a load (Bulb) to the 24v (A+ and A-) and rotate pot at top (Max) until 24v dc is achieved (+/- 5%)

9v = 21.6 v

Commentaires

Draft