...ork to be carried out, e.g. drilling, notching, routing. There may be many operation lines per piece.
| width="134" valign="top" |'''<u>Operation Record</u>'''
|Categories=Operation, Software
...manipulation of these can only be performed in '''Manual Mode''', to enter manual mode from the main screen press the '''STOP''' Button once.
|Introduction=<translate>The ZX5 has a different and much improved grip system where we use the 10mm cutter
...square both horizontally and vertically. There is a jig sent out with all ZX5’s which is used for this purpose, but they can go missing or be thrown ou
...be done using a CNC Sawing and Machining Centre. : Stuga Autoflow, ZX5/E, ZX5/S.
...ntrusion. These rods are controlled by turning the handle, ensuring simple operation and reliable protection
|Description=<translate>With the correct model and spec the ZX5 is able to take some tall profiles above 90-95 mm tall.
To be able to take any profile bar above 90mm in height, certain manual mechanical changes and adjustments are required to the saw outfeed clamp an
24 Kio (2 351 mots) - 13 décembre 2023 à 13:51
×
Erreur de saisie dans le nom du tutoriel
Vous avez entré un nom de page invalide, avec un ou plusieurs caractères suivants :
< > @ ~ : * € £ ` + = / \ | [ ] { } ; ? #
Connexion
Pas encore enregistré ? Créez un compte pour profiter de toutes les fonctionnalités du service !