Refurb Saw Cabinet Valuable Parts

Cette page contient des modifications qui ne sont pas marquées pour la traduction.

Auteur avatarGareth Green | Dernière modification 29/09/2021 par Gareth Green en cours de rédaction

Which Electrical parts to keep from a saw cabinet

Procedure

  1. Remove ONLY the parts identified in the reference below
  2. Label the part with the Stuga part number (SX on the end denoted it is a service exchange or 2nd hand part) AND the build number of the machine it was taken from
  3. Add to Lab stores NEATLY in the correct location
  4. Email stores and GG with part numbers and quantities added


Saw Part Identifier
Photo Part Number Description Location
Refurb Saw Cabinet Valuable Parts Saw Internals.jpg
C0000384SX Nextmove ESB-2 Open Collector Outputs


Older cabinets have a Nextmove ESB card, but they are compatible and should be labelled the same

ZF00D4
Refurb Saw Cabinet Valuable Parts Saw Internals.jpg
C0000155SX Servo Drive: Samsung Fara 1KW ZF01C1

Commentaires

Draft