Upgrading the Igus Energy Chain, Brackets and Trays
Difficulté
Facile
Durée
0 minute(s)
Sommaire
- 1 Étape 1 - Remove existing energy chain and brackets
- 2 Étape 2 - Remove trays
- 3 Étape 3 - Remove tray mounting brackets from posts
- 4 Étape 4 - Add new tray mounting brackets
- 5 Étape 5 - Mount trays
- 6 Étape 6 - Mount the Energy Chain Brackets
- 7 Étape 7 - Mount energy chain
- 8 Étape 8 - Run cables and pipework up the chain
- 9 Étape 9 - Test for full functionality
- 10 Commentaires
- Fichiers
Étape 1 - Remove existing energy chain and brackets
Étape 2 - Remove trays
Étape 3 - Remove tray mounting brackets from posts
Étape 4 - Add new tray mounting brackets
Étape 5 - Mount trays
Mount trays as per attached drawings:
R0015028C - MC Outfeed
R0015029C - Saw Infeed
Étape 6 - Mount the Energy Chain Brackets
IMPORTANT
Check brackets visually to ensure they correct
A0001074 Horizontal Mount bracket required to allow pivoting
Étape 7 - Mount energy chain
Ensure you have the correct number of chain links:
MC Outfeed - 177 links
Saw Infeed - 147 links
Openable on outside diameter.
Last xxxx number of links next to the carriage (on both sides of machine) need to be reversed so that the chain can bend backwards (see image)
Étape 8 - Run cables and pipework up the chain
Étape 9 - Test for full functionality
Published
Français
English
Deutsch
Español
Italiano
Português