Common Issue - Autoflow GZ Datum Sensor Bracket Bent

Common Issue - Autoflow GZ Datum Sensor Bracket Bent

GZ, Datum GZ_Datum_Sensor_Bracket_bent.jpg

Symptoms

• Machine Will not Datum
• GZ Axis Error message
• Growling sound coming from gripper
• GZ Drive position counting up

Root Cause

Sensor bracket bent meaning sensor cannot detect edge of profile

Solution

Bend bracket back into place

Check/ Ajust sensor position relative to aluminium component - there should be a 0.5mm to 1mm gap en none 0

Draft