A2001 - Adjusting BladeToFence

Cette page contient des modifications qui ne sont pas marquées pour la traduction.

    • Updated 21/01/2020 to use bladeOffsetFor and Bak**

Auteur avatarGareth Green | Dernière modification 26/02/2020 par Gareth Green en cours de rédaction

How to adjust the blade to fence value on A2001 autoflow.

    • Updated 21/01/2020 to use bladeOffsetFor and Bak**

Sommaire

The A2001 machine has no SY axis, so the standard mitre length adjustment method (using SY datum) does not apply


The bladeToFence adjustment is managed using the profile screen for each individual profile:

A2001 - Adjusting BladeToFence Image.png


Untick "Use Profile Centre" and adjust the value zero. This makes the software use bladeOffsetFor and bladeOffsetBak as the offset parameters

...You need to update Blade To Fence all profiles individually to 0


Commentaires

Draft