An issue has been found on ZX machines using TwinSAFE for the saftey system where under a certain condition can mean that the MH Doors can be opened whilst the V Notch Blades are spinning. This document provides all the required information to change the wiring on the machines to make the system safe.
Contents
What is the issue that needs resolving?
The operators are able to open the Multihead doors whilst V notch motors are still spinning.
Root cause was the front solenoid lock full of swarf preventing the locking mechanism working.
This has defeated the safety system because the locking safety switch has not been fed back into the safety system.
This only affects TwinSAFE machines:
Z054, Z056, Z057, Z063 to Z070
How do we solve the issue?
The wiring in the system needs to be changed to utilise more of the safety functions inside the saftey switches that are fitted to the doors. The diagrams below show how the doors are wired from factory and how the wiring should be changed to make the machine safe.
Draft
Français
English
Deutsch
Español
Italiano
Português