Step by step guide for installing Sturtz Welder
Difficulté
Moyen
Durée
4 heure(s)
Sommaire
Étape 1 - Lift uprights into position
Lift uprights into positions and fix with 3 x bolts each side on each upright. Fit 2 x cap heads on each rail each side
Étape 2 - Run in belts and chain
Run belts and chains through onto pulleys, fix bracket to upright. Fix chain bracket first. Note: always use fully threaded bolts without a shoulder
Étape 3 - Tension chain and belts
Tension using the threaded bars nuts at the top of the uprights.
Étape 4 - Fit light curtain arms
Étape 5 - Fit guarding
Étape 6 - Connect power and air
Étape 7 - Lift bottom heads and remove stop bolts
Étape 8 - Connect console
connect console and network cable.
Also fit keyboard tray.
Draft
Français
English
Deutsch
Español
Italiano
Português