Parts Identification - Cill Support Blocks

Auteur avatarGareth Green | Dernière modification 27/09/2023 par Gareth Green en cours de rédaction

How to identify the cill pads used on the Stuga Ancilliaries Saw

Check the Profile Range

The cill blocks come in height and width variants to suit various cills. The height of the block lifts the "body" of the cill off the deck so it lays flat to allow angled sawing. This means the height must be higher than the drip nose depth.

Diagram shows the position of the cill support block to bring the cill to a horizontal plane

Ancil Saw Setup Guidance Image.png

The width of the block is less fussy, but some very wide cills may need a wider support block to prevent them twisting on loading

...Regrettably, there is no hard and fast rule with Cill blocks. For "new" cills" it can be experimental. A table below lists the profile systems that have been successfully implemented along with the cill type


Handing

The cill supports are handed, so be sure to choose the correct hand for the machine

Selection

The parts list for Cill Pads is maintained in this Monday Board

Selection Chart
BuildNo HAND Profile System Codes Cill Pads
S059 Std Eurocell AC150

AC180

AC225

D0001897

D0001898

S012 Std Rehau Rehau 246330 150mm

Rehau 246340 180mm

Rehau 503940 225mm

D0001897-16

D0001898-16  


See Also Ancil Saw Setup Guidance

Commentaires

Draft