Fitting M8 Plug for EtherCAT Boxes

Auteur avatarGareth Green | Dernière modification 25/09/2023 par Stuga Engineer en cours de rédaction

Pas encore d'image

Video d'introduction

Étape 1 - Unpack the plug components

...Ensure you remove the white plastic insert from inside the body



Étape 2 - Strip the cable to at least 20mm

It does not matter if it is too long, you will trim it later



Étape 3 - Feed the outer shell over the cable



Étape 4 - Feed the white spacer over the cable cores

...Ensure the white ring end is fed on first



Étape 5 - For further steps see video

Detailed steps to be added later... please see video

Commentaires

Draft