(Page créée avec « {{Tuto Details |Main_Picture=GZ_Datum_Sensor_Bracket_bent.jpg |Main_Picture_annotation={"version":"2.4.6","objects":[{"type":"image","version":"2.4.6","originX":"left","or... ») |
(Aucune différence)
|
Version actuelle datée du 29 janvier 2020 à 15:18
Common Issue - Autoflow GZ Datum Sensor Bracket Bent
Sommaire
Symptoms
- Machine Will not Datum
- GZ Axis Error message
- Growling sound coming from gripper
- GZ Drive position counting up
Root Cause
Sensor bracket bent meaning sensor cannot detect edge of profile
Solution
Bend bracket back into place
Check/ Ajust sensor position relative to aluminium component - there should be a 0.5mm to 1mm gap
Draft
Français
English
Deutsch
Español
Italiano
Português