Accuracy Diagnosis - Software Settings

Auteur avatarGareth Green | Dernière modification 2/04/2020 par Gareth Green en cours de rédaction

Software Settings that operators may have affect accuracy. How to reset to factory settings

Sommaire

Software Setting Description Common Symptoms Link to Page Affected Machines
Fudged V and Y notch depths Operator has changed software settings for V / Y notch depths without finding the root cause V and Y notch depths inaccurate
Kerf Blade kerf incorrectly entered Saw cuts correct for mitre cuts but not square cuts, or vice versa
Laser hole swarf The laser hole is leaving swarf in the profile and creating a laser reading problem when the profile is pushed into the saw Laser loading Errors

Random operation positions

Flowlines, ZX3 / 4 with laser fitted
Drive tuning - following error X Axis or Saw pusher axis is not tuned correctly

Following error when reading laser position gives positional error

Random operation positions, particulalrly on heavier profiles
Calibration
Grip positions for profiles
V notch blade vertical angle
Rack calibration / scaling
Datum holes aligned with V notches
Axis speeds (Pusher deceleration)
Trimstart

Commentaires

Draft