| [version en cours de rédaction] | [version en cours de rédaction] |
| (Une révision intermédiaire par le même utilisateur non affichée) | |||
| Ligne 6 : | Ligne 6 : | ||
|Tags=Accuracy | |Tags=Accuracy | ||
}} | }} | ||
| − | <translate> | + | <translate>{| class="wikitable" |
| − | |||
| − | {| class="wikitable" | ||
|+ | |+ | ||
!Software Setting | !Software Setting | ||
| Ligne 20 : | Ligne 18 : | ||
|V and Y notch depths inaccurate | |V and Y notch depths inaccurate | ||
| | | | ||
| − | | | + | |All except Saw |
|- | |- | ||
|Kerf | |Kerf | ||
| Ligne 26 : | Ligne 24 : | ||
|Saw cuts correct for mitre cuts but not square cuts, or vice versa | |Saw cuts correct for mitre cuts but not square cuts, or vice versa | ||
| | | | ||
| − | | | + | |All except ecoline |
|- | |- | ||
|Laser hole swarf | |Laser hole swarf | ||
| Ligne 33 : | Ligne 31 : | ||
Random operation positions | Random operation positions | ||
| | | | ||
| − | |Flowlines, ZX3 / 4 with laser fitted | + | |Flowlines, ZX3 / 4 '''<u>with</u>''' laser fitted |
|- | |- | ||
|Drive tuning - following error | |Drive tuning - following error | ||
|X Axis or Saw pusher axis is not tuned correctly | |X Axis or Saw pusher axis is not tuned correctly | ||
Following error when reading laser position gives positional error | Following error when reading laser position gives positional error | ||
| − | |Random operation positions, | + | |Random operation positions, particularly on heavier profiles |
| − | |||
| | | | ||
| + | |All | ||
|- | |- | ||
| − | |Calibration | + | |Rack Calibration / Scaling |
| − | | | + | |Calibration has been altered incorrectly |
| − | | | + | |Random operation positions |
| − | |||
| | | | ||
| + | |All | ||
|- | |- | ||
|Grip positions for profiles | |Grip positions for profiles | ||
| + | |Gripper position for a profile is causing it to tip | ||
| + | |||
| + | Gripper position is not firm enough causing gripper slip | ||
| | | | ||
| | | | ||
| − | | | + | |All except saw |
| − | |||
|- | |- | ||
|V notch blade vertical angle | |V notch blade vertical angle | ||
| + | |Tool angle of V notch blade is not accurately locating it in a vertical plane | ||
| + | |v notches too deep or incorrect position | ||
| | | | ||
| − | | | + | |V Notching on ring |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
|- | |- | ||
|Datum holes aligned with V notches | |Datum holes aligned with V notches | ||
| + | |V notch offsets incorrect to datum position | ||
| + | |V notches incorrect but routing positions correct, or vice-versa | ||
| | | | ||
| − | | | + | |All except saw |
| − | |||
| − | |||
|- | |- | ||
|Axis speeds (Pusher deceleration) | |Axis speeds (Pusher deceleration) | ||
| + | |Pusher is not connected with end of profile after deceleration - ie pusher stopped but profile carried on | ||
| + | |Random operation positions | ||
| | | | ||
| − | | | + | |Saw |
| − | + | ||
| − | + | Flowline | |
| + | |||
| + | ZX3 / 4 | ||
|- | |- | ||
|Trimstart | |Trimstart | ||
| + | |Trimstart is incorrectly set up or switched off, and the profile end is not square - ie the machine centre gripper has a different datum position to the saw pusher | ||
| + | |Random operation positions on particular profiles | ||
| | | | ||
| − | | | + | |Flowlines, ZX3 / 4 '''<u>without</u>''' laser fitted |
| − | |||
| − | |||
|}</translate> | |}</translate> | ||
{{PageLang | {{PageLang | ||
Version actuelle datée du 2 avril 2020 à 16:25
Software Settings that operators may have affect accuracy. How to reset to factory settings
Sommaire
| Software Setting | Description | Common Symptoms | Link to Page | Affected Machines |
|---|---|---|---|---|
| Fudged V and Y notch depths | Operator has changed software settings for V / Y notch depths without finding the root cause | V and Y notch depths inaccurate | All except Saw | |
| Kerf | Blade kerf incorrectly entered | Saw cuts correct for mitre cuts but not square cuts, or vice versa | All except ecoline | |
| Laser hole swarf | The laser hole is leaving swarf in the profile and creating a laser reading problem when the profile is pushed into the saw | Laser loading Errors
Random operation positions |
Flowlines, ZX3 / 4 with laser fitted | |
| Drive tuning - following error | X Axis or Saw pusher axis is not tuned correctly
Following error when reading laser position gives positional error |
Random operation positions, particularly on heavier profiles | All | |
| Rack Calibration / Scaling | Calibration has been altered incorrectly | Random operation positions | All | |
| Grip positions for profiles | Gripper position for a profile is causing it to tip
Gripper position is not firm enough causing gripper slip |
All except saw | ||
| V notch blade vertical angle | Tool angle of V notch blade is not accurately locating it in a vertical plane | v notches too deep or incorrect position | V Notching on ring | |
| Datum holes aligned with V notches | V notch offsets incorrect to datum position | V notches incorrect but routing positions correct, or vice-versa | All except saw | |
| Axis speeds (Pusher deceleration) | Pusher is not connected with end of profile after deceleration - ie pusher stopped but profile carried on | Random operation positions | Saw
Flowline ZX3 / 4 | |
| Trimstart | Trimstart is incorrectly set up or switched off, and the profile end is not square - ie the machine centre gripper has a different datum position to the saw pusher | Random operation positions on particular profiles | Flowlines, ZX3 / 4 without laser fitted |
Draft
Français
English
Deutsch
Español
Italiano
Português