Autoflow Saw Motor End Swap

The main saw motor for an autoflow D0004079 (made from E0000002) has to be rebuilt due to supplier changing the location of the terminal box.

Autoflow_Saw_Motor_End_Swap_big-A2028_WhatsApp_Image_2023-09-14_at_09.49.58.jpg

Problem

It is not possible to source the original format, so the motor needs to be reassembled in the reverse configuration to move the terminal box

Solution

They are a simple rebuild,

1. undo tie rods,
2. remove key from spindle,
3. remove endcap,
4. remove body
5. rotate then rebuild .

en none 0

Draft