Cyclical Control of Outputs to Aid Cylinder Speed Setup

Description of built in feature of IO screen to allow a maintenance operative to quickly and accurately adjust speed rates of cylinders

Problem

Setting the speed of a cylinder requires two people to do it effectively. One to operate the IO screen and one to adjust the speed

Resolution

The IO Service screens on winMulti have a Cycle Timer located at the bottom

• If an output is set to on, then the cycle timer increased to a value, the output will cycle on and off at the rate indicated in seconds. This is really useful to accurately set the speed of a cylinder.
• Multiple outputs can be set initially, and then all cylinders will fire simultaneously - really useful for setting popup cylinders and checking for air starvation

Solenoid / Solenoid Valves

Some systems (eg Stuertz Infeed table) have "solenoid / solenoid" operated valves instead of the "standard "solenoid / spring" valves
en none 0

Draft