Stuertz Conveyor Motor and Indexing Setup

Correct setting and adjustment of the Stuertz Conveyor and Indexing System

Index

Indexer works on one revolution of motor / gearbox is exactly one index on the conveyor belt

Accel / decel of motor set to 0.5 sec

Motor has a brake

Use the advance button to move to index one position

Adjust final position with brake sensor on arc

Note the motor always decelerates and overshoots

If the position is a long way out, the indexer arm can be adjusted in large increments

Infeed Table Setup

Infeed Setup Functionality

IORef	Reference Code	Function	Notes
Y109	OuA_IMotFwd	Rotate Forwards	Forwards means belts should take the profile from the operator towards the backfence
Y110	OuA_IMotRev	Rotate Reverse	Belts rotated in reverse
Y382	OuA_IMotBrake	Motor Brake	Motors have a brake function white needs to be ACTIVE / ON to release the brake
X388	InA_CnvBrk	Sensor for fwd stopping position	This sensor tells the motor when to decelerate to stop the profile close to the loading position. ...Generally, a deceleration on the motor will cause this position to overrun

en none 0

Draft