CX5120 Replacement

Replacement of a CX5120 on a customers machine.

Difficulté

Hard Difficile

Durée

30 minute(s) minute(s)

CX5120 Replacement, CX5120 TB0451_CX5120_Beckhoff_PC_Setup_image2.jpeg

Introduction

Replacement of Beckhoff CX5120

Skill Level: Experience with Twincat & Visual Studio

Don’t Switch CF cards around. Keep them in the CX5120’s they came with.

• Pièces et outils

Pièces et outils

[[Item:|]] A fatal error occurred in the #info parser function

Étape 1 - CX5120 Setup

Ensure replacement CX5120 is setup using

  https://stuga.dokit.app/wiki/TB0451_CX5120_Beckhoff_PC_Setup

before sending to site

Étape 2 - Fix replacement into machine

This should be a one to one replacement.

Don’t Switch CF cards around.

Étape 3 - Add Twincat Routes

On the front end remove the old route and add a new route to the back end.

When adding the route ensure the Secure ADS is not ticked

Étape 4 - Open the current TwinCat project.

Étape 5 - Check the route.

Étape 6 - Check the IOs match. (do not add any unexpected devices like COM ports)

Étape 7 - Push the project to the BE.

Étape 8 - Put the ADS route into the params.saw (2 places)

1. Start Multi and check that everything works.

Étape 9 - TWINSAFE

If the system has TWINSAFE and  you get ADS routing errors:

Check the rout on the ELxxxxx if that is good, down load the Twinsafe back into the project. If you are unsure how to do this call Beckhoff support.

en none 0 Draft