RMZX515 Retrofit Beam Movement Guard

Fitting ZX5 Beam Move finger guard

Compliance RMZX515_Retrofit_Beam_Movement_Guard_ZX5.15_Solution.jpg

Objectives

The beam move cylinder introduces a potential finger trap

A simple guard has been designed to go over this area. D0015948.

1. Remove the main guard panel covering this area
2. Fix with two screws through holes provided
3. Replace the main guard

Completion

This modification is expected to take no longer than 1/2 hour to complete.

Completion is when:

• All guards fitted and secured
• Entry in Monday Retrofit Compliance board
  1. Entry in comments section to log you have completed it and any difficulties encountered
  2. Update the Status
  3. Add time taken
  4. Add phots to evidence work in photos column

 en none 0

Draft