Software Settings that operators may have affect accuracy. How to reset to factory settings
Sommaire
| Software Setting | Description | Common Symptoms | Link to Page | Affected Machines |
|---|---|---|---|---|
| Fudged V and Y notch depths | Operator has changed software settings for V / Y notch depths without finding the root cause | V and Y notch depths inaccurate | ||
| Kerf | Blade kerf incorrectly entered | Saw cuts correct for mitre cuts but not square cuts, or vice versa | ||
| Laser hole swarf | The laser hole is leaving swarf in the profile and creating a laser reading problem when the profile is pushed into the saw | Laser loading Errors
Random operation positions |
Flowlines, ZX3 / 4 with laser fitted | |
| Drive tuning - following error | X Axis or Saw pusher axis is not tuned correctly
Following error when reading laser position gives positional error |
Random operation positions, particulalrly on heavier profiles | ||
| Calibration | ||||
| Grip positions for profiles | ||||
| V notch blade vertical angle | ||||
| Rack calibration / scaling | ||||
| Datum holes aligned with V notches | ||||
| Axis speeds (Pusher deceleration) | ||||
| Trimstart |
Draft
Français
English
Deutsch
Español
Italiano
Português