Fitting M8 Plug for EtherCAT Boxes

How to fit a plug or socket to connect to M8 connection holes on the EtherCAT fieldbus boxes

Difficulté

Hard Difficile

Durée

10 minute(s) minute(s)

M8, EtherCAT, Plug, Socket

Vimeo

• Pièces et outils

Pièces et outils

[[Item:|]] A fatal error occurred in the #info parser function

Étape 1 - Unpack the plug components

...Ensure you remove the white plastic insert from inside the body

Étape 2 - Strip the cable to at least 20mm

It does not matter if it is too long, you will trim it later

Étape 3 - Feed the outer shell over the cable

Étape 4 - Feed the white spacer over the cable cores

...Ensure the white ring end is fed on first

Étape 5 - For further steps see video

Detailed steps to be added later... please see video

en none 0 Draft