How to set up the WEG inverters. used on the Transfer crank and Infeed modules.
History
| Date | Photo | |
|---|---|---|
| 2021 | Original Unit fitted due to supply chain issues with Eaton Motor Starters |  |
| 2024 | IO Module added to allow a fault signal to be fed back to control system
see ECN004 WEG Inverter Update - Fault Output |
 |
Easy Start Guide
Parameters
| Number | Setting | Function | Notes |
|---|---|---|---|
| P100 | Accel Time | See Below | |
| P101 | Decel Time | See Below | |
| P133 | 50 | Min Frequency Ref | |
| P134 | 50 | Max Frequency Ref | |
| P271 | 1 | Set DIx to 24v DC | |
| P220 | 1 | Remote Selection | |
| P226 | 4 | Remote Rotate Selection | |
| P227 | 1 | Remote Run Selection | |
| P263 | 4 | DI1 Function (FWD) | |
| P264 | 5 | DI2 Function (REV) | |
| P265 | 20 | DI3 Function (RESET) | Only Used when IO Module is fitted to front of unit |
| P266 | 40 | DI4 Function (ESTOP) | |
| P275 | 13 | DO1 Function (FAULT) |
| Machine Type | Inverter Location
(Module Panel) |
Motor Location
(Module) |
Motor | P100 | P101 |
|---|---|---|---|---|---|
| ZX5 | A | A | Infeed Conveyor | 0.1 | 0.1 |
| A | A | Infeed Wheel | 0.1 | 0.1 | |
| B | C | Crank | 0.5 | 0.1 | |
| B | D | Crank | 1.0 | 0.2 | |
| B | E | Crank | 0.5 | 0.1 | |
| Autoflow Mk4 | B | A | Infeed conveyor | 0.5 | 0.5 |
Further Information
Published
Français
English
Deutsch
Español
Italiano
Português