How to set up the WEG inverters. used on the Transfer crank and Infeed modules. These are fitted to some ZX5 machines in the field replacing the Eaton Inverters for a short period.
Auteur 
Stuga Engineer | Dernière modification 28/10/2024 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽
How to set up the WEG inverters. used on the Transfer crank and Infeed modules. These are fitted to some ZX5 machines in the field replacing the Eaton Inverters for a short period.
WEG_Inverter_Setup_WEG_INV.jpg
en none 0
Please note : Z094 recently when fitting a new Unit that not all the Parameters above exist Like P275 - Unless it has that module fitted.
Published
Vous avez entré un nom de page invalide, avec un ou plusieurs caractères suivants :
< > @ ~ : * € £ ` + = / \ | [ ] { } ; ? #
Français
English
Deutsch
Español
Italiano
Português
Matthew Preston Also reports on Z094 that P265 had to be set at 0 not 20 to work, Also P266 had to be set at 0 not 40 to work. These where the values in the 2 other units that where working