ACEpc Changing IP address using netedit

Using the netedit program to change the IP address of an ACEpc running DOS software

Difficulté

Easy Facile

Durée

5 minute(s) minute(s)

Manual-ACEpc_ACEpclogo.jpg

Introduction

The ACEpcs use two different systems for connecting a network

1. NETBeui - this was used on earlier machines but reliability depends on the customer network setup. Reconfiguration after initial setup is difficult
2. IP addressing - A setup system was written using IP addresses to connect. This is a little harder to set up, but is easier to change later. A special program called netedit was written which updates all the correct files in the background

Étape 1 -

en none 0 Draft