Fault finding Guide for issues with toothed gripper on ZX5 and Flowline TruLoc system
Sommaire
| Issue | Symptoms | Root Causes | Checks |
|---|---|---|---|
| Slim Z Profile Twists when Gripper Approaches on Saw side | The combination of the pushing movement of the gripper and the side channel pressure causes the profile to roll over before the gripper can engage
Particularly an issue on Ovolo profile with a rolled edge, and on shorter offcuts |
Side Channel Pressure too high | Check it is set at 1.5bar.
Often increased because the channel is not operating smoothly and correctly |
| Rear Fence Alignment | Rear Fences can get knocked out of alignment. Check with a straight edge or similar | ||
| Channel bar alignment parallel to rear fence | With channel closed, check the distance of the channel bar to the rear fence upstands | ||
| Software Version | Check Control Systems Log to ensure the software version | ||
| Gripper mechanics | Check the mechanical integrity of the gripper system | ||
Draft
Français
English
Deutsch
Español
Italiano
Português