Hikvision Camera Setup

Setting up the Hikvision cameras and recording system

Difficulté

Medium Moyen

Durée

10 minute(s) minute(s)

camera, recording Hikvision_Camera_Setup_Annotation_2019-09-04_100923.JPG

Introduction

These are the Hikvision DS-2CD2343G0-I Cameras (C0001152) that will replace the obsolete UCAMs that have been used on previous machines.

Connected via a multi way PoE injector (C0001238).

And with SD card (C0001239).

Étape 1 - Open SADPTool

On the machine open the “SADPTool” . This is our camera finder and IP address modifier for the cameras

Étape 2 -

When open, the SADP Tool will display all Hikvision cameras on the connected network. If the IP address has not been modified before going to site the camera needs to be “Activated” , given a password (Stuga001) and an IP address set in an appropriate range (preferably given by the customer IT team). 3.

Étape 3 - Security Questions

Security Question 1:Your Father’s Name?

Answer 1: Flowline

Security Question 2: Your Mother’s Name?

Answer 2: Microline

Security Question 3: Name of your Class Teacher?

Answer 3: Saw

After this, you will be asked to set the ip address in the IP address section.

Étape 4 - Open in Internet Explorer

Using internet explorer (Not chrome or edge) type the IP address into the web address bar.

Étape 5 - Download Plugin

Click on the link to download a plugin. When prompted to download click ‘Run’.

Étape 6 -

en none 0 Draft