Back Polish Stuga Saw Blades

How to back polish a Stuga saw blade

Difficulté

Easy Facile

Durée

5 minute(s) minute(s)

Back_Polish_Stuga_Saw_Blades_IMG_3674.jpg

Introduction

Use an Orbital sander with 240 or 400 grit paper and as per the video use the sander to go with the blade direction.

Polish the edges of the Teeth to stop Jitter and tension causing PVC to chip.

Go around the whole blade 5 times doing both sides

Vimeo

Utiliser des vêtements de protection pour les mains

Avertissement des objets pointus et tranchants

Étape 1 - Blade Back polish

Always Polish in this orientation in relation to the Teeth of the blade

en none 0 Draft