Back Polish Stuga Saw Blades : Différence entre versions

Modèles/fichiers mis à jour (pages non relues en gras) : Back Polish Stuga Saw Blades

[version approuvée]

[en attente de relecture]

Version du 24 juillet 2025 à 12:50

How to back polish a Stuga saw blade using emery cloth

Difficulté

Facile

Durée

5 minute(s)

How to back polish a Stuga saw blade using emery cloth

Difficulté

Facile

Durée

5 minute(s)

Use an Orbital sander with 240 or 400 grit paper and as per the video use the sander to go with the blade direction.

Polish the edges of the Teeth to stop Jitter and tension causing PVC to chip.

Go around the whole balde 5 times ,

Vimeo

Utiliser des vêtements de protection pour les mains

Avertissement des objets pointus et tranchants

Always Polish in this orientation in relation to the Teeth of the blade

en none 0 Published

@@ Ligne 8 : / Ligne 8 : @@
 }}
 {{Introduction
-|Introduction=<translate></translate>
+|Introduction=<translate>Use an Orbital sander with 240 or 400 grit paper and as per the video use the sander to go with the blade direction.
+Polish the edges of the Teeth to stop Jitter and tension causing PVC to chip.
+Go around the whole balde 5 times ,</translate>
 }}
 {{TutoVideo
@@ Ligne 14 : / Ligne 19 : @@
 |VideoURLVimeo=https://vimeo.com/372898018
 }}
-{{Materials
+{{Materials}}
-|ItemList={{ItemList
-|Item=Emery Cloth
-}}
-}}
 {{EPI
 |EPI=use-protective-handwear, warning-of-sharp-objects