Stuertz Infeed - Check GY Position Parallelism

How to check the parallelism of the Stuertz Infeed - GY axis position to backfence

Difficulté

Hard Difficile

Durée

30 minute(s) minute(s)

Stuertz_Infeed_-_Check_GY_Position_Parallelism_Screenshot_2023-01-31_070146.jpg

Introduction

It is important that the parallelism of the GY axis to the backfence is set and maintained along the length of the rack. This tutorial describes how to check this parallelism without the need for measuring equipment

Potential Symptoms of a problem

• Gripper cannot pick up offcuts
• Gripper /profile end forced away from backfence
• Accuracy problems
• Gripper wobbles after it has released profile

Use the laptop to enable you to control the Service screen whilst inside the infeed table

...You will be inside the danger area of the machine - ensure operators are aware of your situation

Create a spreadsheet or a table to log your results,.

• Pièces et outils

Pièces et outils

Laptop

[[File:]]

Windows 10 Laptop

Laptop

[[Item:|]] A fatal error occurred in the #info parser function

Étape 1 - Ensure a zero GY position at datum

1. Datum the machine and move GY axis to zero

Étape 2 - Move the GX axis to a position

Étape 3 -

en none 0 Draft