WEG Inverter Setup : Différence entre versions

[version en cours de rédaction]

Version du 20 décembre 2023 à 12:04

How to set up the WEG inverters. used on the Transfer crank and Infeed modules. These are fitted to some ZX5 machines in the field replacing the Eaton Inverters for a short period.

Auteur Stuga Engineer | Dernière modification 28/10/2024 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽

How to set up the WEG inverters. used on the Transfer crank and Infeed modules. These are fitted to some ZX5 machines in the field replacing the Eaton Inverters for a short period.

Sommaire

[masquer]

1 Accel and Decel will also need to be set. The values to be set for each axis are below.
2 P100= Accel
3 P101= Decel
4 Commentaires

WEG_Inverter_Setup_WEG_INV.jpg

Accel and Decel will also need to be set. The values to be set for each axis are below.

P100= Accel

P101= Decel

en none 0

Commentaires

P265 and P266

Gareth Green|Publié le Oct 25 at 11:08 am|

0

Matthew Preston Also reports on Z094 that P265 had to be set at 0 not 20 to work, Also P266 had to be set at 0 not 40 to work. These where the values in the 2 other units that where working

NOTE

Gareth Green|Publié le Oct 24 at 3:41 pm|

0

Please note : Z094 recently when fitting a new Unit that not all the Parameters above exist Like P275 - Unless it has that module fitted.

Published