[version en cours de rédaction] | [version en cours de rédaction] |
Ligne 15 : | Ligne 15 : | ||
|Gripper Profile Present Lever slot length | |Gripper Profile Present Lever slot length | ||
D0015093 | D0015093 | ||
− | | | + | |Slot length may need increasing to allow full range of travel |
| | | | ||
|- | |- | ||
Ligne 21 : | Ligne 21 : | ||
|Gripper nose Dowels need to be +10mm longer fitted to a nose | |Gripper nose Dowels need to be +10mm longer fitted to a nose | ||
R0015004 Assembly drawing | R0015004 Assembly drawing | ||
− | | | + | |Original design had 40mm dowels. Later upgraded to 50mm |
+ | <br /> | ||
| | | | ||
|- | |- | ||
|3 | |3 | ||
|Bolt that holds it needs a washer, not half nut | |Bolt that holds it needs a washer, not half nut | ||
− | | | + | |Washers need to be fitted to get a positive grip |
| | | | ||
|- | |- | ||
Ligne 41 : | Ligne 42 : | ||
|6 | |6 | ||
|Clutch Tightness | |Clutch Tightness | ||
+ | | | ||
+ | | | ||
+ | |- | ||
+ | |7 | ||
+ | | | ||
| | | | ||
| | | |
Checklist to overcome gripping accuracy issues on ZX5
Auteur Gareth Green | Dernière modification 17/05/2021 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽
Pas encore d'image
Checklist to overcome gripping accuracy issues on ZX5
ZX5, Accuracy, Gripper, Nose
Title | Notes | Picture | |
---|---|---|---|
1 | Gripper Profile Present Lever slot length
D0015093 |
Slot length may need increasing to allow full range of travel | |
2 | Gripper nose Dowels need to be +10mm longer fitted to a nose
R0015004 Assembly drawing |
Original design had 40mm dowels. Later upgraded to 50mm
|
|
3 | Bolt that holds it needs a washer, not half nut | Washers need to be fitted to get a positive grip | |
4 | Backlash | ||
5 | Moving beam home and out sensor works on the last 0.5mm of travel | ||
6 | Clutch Tightness | ||
7 |
en none 0
Draft
Vous avez entré un nom de page invalide, avec un ou plusieurs caractères suivants :
< > @ ~ : * € £ ` + = / \ | [ ] { } ; ? #