Back Polish Stuga Saw Blades : Différence entre versions

[en attente de relecture]

Version actuelle datée du 24 juillet 2025 à 13:09

How to back polish a Stuga saw blade

Difficulté

Facile

Durée

5 minute(s)

How to back polish a Stuga saw blade

Difficulté

Facile

Durée

5 minute(s)

Use an Orbital sander with 240 or 400 grit paper and as per the video use the sander to go with the blade direction.

Polish the edges of the Teeth to stop Jitter and tension causing PVC to chip.

Go around the whole blade 5 times doing both sides

Vimeo

Utiliser des vêtements de protection pour les mains

Avertissement des objets pointus et tranchants

Always Polish in this orientation in relation to the Teeth of the blade

en none 0 Draft

@@ Ligne 1 : / Ligne 1 : @@
 {{Tuto Details
 |Main_Picture=Back_Polish_Stuga_Saw_Blades_IMG_3674.jpg
-|Description=<translate>How to back polish a Stuga saw blade using emery cloth</translate>
+|Description=<translate>How to back polish a Stuga saw blade</translate>
 |Categories=Maintenance
 |Difficulty=Easy
@@ Ligne 13 : / Ligne 13 : @@
-Go around the whole balde 5 times ,</translate>
+Go around the whole blade 5 times  doing both sides</translate>
 }}
 {{TutoVideo
@@ Ligne 36 : / Ligne 36 : @@
 }}
 {{Tuto Status
-|Complete=Published
+|Complete=Draft
 }}