ACEpc Changing IP address using netedit : Différence entre versions

[version en cours de rédaction]

Version du 18 septembre 2019 à 13:32

Using the netedit program to change the IP address of an ACEpc running DOS software

Auteur Gareth Green | Dernière modification 19/09/2019 par Gareth Green en cours de rédaction ⧼frevu-button-review-label⧽

Difficulté

Facile

Durée

5 minute(s)

Using the netedit program to change the IP address of an ACEpc running DOS software

Difficulté

Facile

Durée

5 minute(s)

Sommaire

1 Introduction
2 Étape 1 - Check if netedit is installed
3 Étape 2 -
4 Commentaires

ACEpc, network, netedit Manual-ACEpc_ACEpclogo.jpg

Introduction

The ACEpcs use two different systems for connecting a network

NETBeui - this was used on earlier machines but reliability depends on the customer network setup. Reconfiguration after initial setup is difficult
IP addressing - A setup system was written using IP addresses to connect. This is a little harder to set up, but is easier to change later. A special program called netedit was written which updates all the correct files in the background

Étape 1 - Check if netedit is installed

At the command prompt, change to drive C: and ensure netedit exists

If the file does not exist, follow the procedure for installing the netedit software using a 'netsetgo' disk

https://stuga.dokit.app/wiki/ACEpc_Installing_netedit_with_NetSetGo_disk

Étape 2 -

Commentaires

en none 0 Draft

@@ Ligne 7 : / Ligne 7 : @@
 |Duration=5
 |Duration-type=minute(s)
+|Tags=ACEpc, network, netedit
 }}
 {{Introduction
 |Introduction=<translate>The ACEpcs use two different systems for connecting a network
-# NETBeui - this was used on earlier machines but reliability depends on the customer network setup. Reconfiguration after initial setup is difficult
+#NETBeui - this was used on earlier machines but reliability depends on the customer network setup. Reconfiguration after initial setup is difficult
-# IP addressing - A setup system was written using IP addresses to connect. This is a little harder to set up, but is easier to change later. A special program called netedit was written which updates all the correct files in the background</translate>
+#IP addressing - A setup system was written using IP addresses to connect. This is a little harder to set up, but is easier to change later. A special program called netedit was written which updates all the correct files in the background</translate>
 }}
 {{Materials}}
 {{EPI}}
+{{Tuto Step
+|Step_Title=<translate>Check if netedit is installed</translate>
+|Step_Content=<translate>At the command prompt, change to drive C: and ensure netedit exists
+If the file does not exist, follow the procedure for installing the netedit software using a 'netsetgo' disk
+[[ACEpc Installing netedit with NetSetGo disk|https://stuga.dokit.app/wiki/ACEpc_Installing_netedit_with_NetSetGo_disk]]
+<br /></translate>
+}}
 {{Tuto Step
 |Step_Title=<translate></translate>
@@ Ligne 22 : / Ligne 33 : @@
 {{Notes}}
 {{PageLang
+|Language=en
 |SourceLanguage=none
 |IsTranslation=0
-|Language=en
 }}
 {{Tuto Status
 |Complete=Draft
 }}